System Description

System Description and Installation Manual for MXS ICD10004-01
© Sagetech Corporation 2018 Confidential Proprietary Export-Controlled Page 111 of 160
4. ADS-B Target State Report Message: Type 0x97
The ADS-B Target State Report is one of several message types sent by the MXS to report data on a particular ADS-B In
participant. The ADS-B Target State Report Message:
 Is sent for aircraft/vehicles being monitored by the MXS as specified in the Target Request Message (type
0x0B).
 Provides aircraft/vehicle information about the ADS-B participant (such as selected altitude and autopilot
settings).
An overview of the ADS-B Target State Report Message is shown in Table 0-51Table 6-55. Table 0-52Table 6-56
provides the detailed message definition.
SV Quality - NACp
NACP: EPU < 10 m
[ 0A ]
SV Quality - NACv
NACV: Horizontal Velocity Error < 3 m/s
[ 02 ]
SV Quality – System
Design Assurance.
SV Quality - SIL
SDA supported failure condition: Hazardous, SIL: ≤ 1x10^–7 per flight hour
[ 1B ]
GVA
GVA: ≤ 45 m
[ 02 ]
NIC Baro.
Barometric altitude reported is either based on a cross-checked Gilham code input or
is based on a non-Gilham coded source
[ 01 ]
HRD
Heading referenced to True North
[ 00 ]
Vertical Rate Type
Vertical Rate Type: Barometric Altitude
[ 01 ]
Checksum
8-bit arithmetic sum of message from Start Byte to last byte of the Payload Data.
[ CE ]