User Manual
19
5. - SETUP
5.1 – MENU
MODE
ADDR
VALU
A001 … A512
DMX Address set
SLAV
ON/OFF
Slave Mode
AUTO
IP1 – 8
ALON (AU-A)
Auto Mode
MAST (AU-M)
Master Auto Mode
SOUN
IP1 – 8
ALON (SO-A)
Sound Mode
ALON (SO-M)
Master Sound Mode
SET
MIC
M00 … M99
Microphone sensitivity regulation
LODA
ON/OFF
Factory setting restore
VER
Vxx
Software version
CALI
CH1
0 – 255
Pan calibration
CH3
0 – 255
Tilt calibration
CH5
0 – 255
Color wheel calibration
CH6
0 – 255
Gobo wheel calibration
CH9
0 – 255
Focus calibration
DMX
MOD1 (12Ch)
12Ch DMX mode
MOD2 (10Ch)
10Ch DMX mode
REST
ON/OFF
Unit reset
TEMP
Txxx
Temperature
DEGR
PAN
360 – 540 – 630
PAN/TILT angle set
TILT
90 – 180 – 270
P-REV
ON/OFF
PAN reverse
T-REV
ON/OFF
TILT reverse
5.2 – MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.
• Use a DMX cable to link together all the units from the connector DMX OUT to DMX IN.
• Define the first unit of the chain as MASTER, all other units must be set in SLAVE mode
(SLAV → ON).
• Operate the Master unit in Automatic mode (AU-M) or Musical (SO-M) to operate the
entire system. The entire chain of Slave unit will act as the Master unit.