Hazer Machine – Air Pump – DMX SG H1500 MANUALE UTENTE USER MANUAL
Rev. 01-01/15 INDICE: 1. INTRODUZIONE p. 3 2. ISTRUZIONI DI SICUREZZA p. 4 3. APERTURA CONFEZIONE E CONTROLLO p. 7 4. INSTALLAZIONE ED ACCENSIONE p. 8 5. ISTRUZIONI PER L'USO p. 9 6. MANUTENZIONE p. 10 7. SPECIFICHE TECNICHE p. 11 INDEX: 1. INTRODUCTION p. 12 2. SAFETY INSTRUCTIONS p. 13 3. OPENING AND CONTROL p. 16 4. INSTALLATION AND SWITCH ON p. 17 5. SETUP p. 18 6. MAINTENANCE p. 19 7. TECHNICAL SPECIFICATIONS p.
1. INTRODUZIONE Grazie per avere scelto un nostro prodotto! Vi preghiamo di fare riferimento alle istruzioni e alle avvertenze contenute nel presente manuale per l’utilizzo del dispositivo e di conservarlo per future consultazioni. Il presente manuale contiene informazioni riguardanti l’installazione e l’utilizzo del dispositivo. Le informazioni contenute in questo documento sono state attentamente redatte e controllate. Tuttavia non è assunta alcuna responsabilità per eventuali inesattezze.
2. ISTRUZIONI DI SICUREZZA Attenzione! Questo prodotto non è adatto ad un uso domestico. Leggere il presente manuale prima di installare e dare corrente all’apparecchiatura, seguire le precauzioni di sicurezza elencate di seguito ed osservare tutti gli avvertimenti indicati nel presente manuale e stampati sull’apparecchiatura. Si prega di contattare un distributore PROEL per ricevere assistenza riguardo qualsiasi dubbio su come attivare l’apparecchiatura in modo sicuro.
TEMPERATURE DI RIFERIMENTO Il range di temperatura ambiente d'utilizzo del dispositivo varia tra +5°C (min) e +40°C (max), al di fuori di tale intervallo l'apparecchio non deve essere utilizzato. La temperatura massima dell’alloggiamento Tb=80°C non deve mai essere superata. Non ostruire le ventole di scarico, garantire uno spazio libero di almeno 1 metro attorno ai fori di aerazione.
RISCHI RESPIRATORI L'esposizione diretta al fumo può causare problemi respiratori a persone cagionevoli di salute. Non puntare l'ugello di fuoriuscita del fumo in direzione del volto o, comunque, ad altezza del volto. Non creare dense cortine di fumo in spazi piccoli e poco ventilati, assicurare almeno 2 metri di visibilità. Non esporre persone con problemi respiratori (asma, bronchiti, ecc.) o allergici alla fuoriuscita di fumo.
3. APERTURA DELLA CONFEZIONE E CONTROLLO Aprire con cura la confezione, verificare il contenuto e assicurarsi che tutte le parti siano presenti e siano in buone condizioni. Nel caso in cui alcune parti non siano presenti o siano danneggiate, contattare immediatamente il proprio fornitore e conservare l’imballaggio per la verifica.
4. - INSTALLAZIONE ED ACCENSIONE 4.1 - INSTALLAZIONE MACCHINA DEL FUMO La macchina del fumo può essere installata a pavimento in appoggio sugli appositi piedini in gomma SEMPRE in posizione piana, non può essere inclinata o capovolta. Non è possibile installare l’apparecchiatura a parete, a soffitto o su truss. ATTENZIONE! Ad eccezione di quando il dispositivo è appoggiato a pavimento, il montaggio del cavo di sicurezza (PLH200 venduta separatamente) è obbligatorio. 4.
4.3 - COLLEGAMENTO ALLA CATENA DMX Utilizzare un cavo conforme alle specifiche EIA RS-485: bipolare intrecciato, schermato, 120Ohm di impedenza caratteristica e bassa capacità (PROEL DMXD – DMXD1). Non utilizzare cavo microfonico o altro cavo con caratteristiche diverse da quelle specificate. Le terminazioni devono essere effettuate con connettori maschio/femmina tipo XLR a 3 pin.
5.3 – MODALITA' TIMER Mediante il menù principale è possibile impostare manualmente i principali settaggi della macchina (par. 5.1 – Mappa del menù). Una volta configurati i parametri desiderati è sufficiente confermarli premendo il tasto “SET” sulla pulsantiera; premendo quindi il pulsante “TIMER” l’unità entrerà in modalità Timer e proseguirà ciclicamente come da settaggi impostati precedentemente. Per interrompere l’emissione di fumo è necessario premere nuovamente il tasto “SET”. 5.
7. - SPECIFICHE TECNICHE Alimentazione: 230V, 50HZ Potenza assorbita: 1500 W Modalità operative: Modalità Timer, Modalità Manuale, DMX512 Capacità serbatoio: 6,0 litri DMX: 2 canali Display digitale per impostazione indirizzo e funzioni Dimensioni (L x A x P): mm. 570x270x415 Peso: 18,2 kg Liquido consigliato: Liquido per la nebbia PROEL (cod.
1. - INTRODUCTION Thank You for choosing one of Our products! Please refer to the instructions and warnings contained in this user manual, please retain it for future reference. This manual contains information about the installation and use of the device. The information contained in this publication has been carefully prepared and checked. However it is not assumed any responsibility for any inaccuracies.
2. - SAFETY INSTRUCTIONS Caution! This product is not suitable for household illumination. Please read this manual before installing and applying power to the equipment, follow the safety precautions listed below and observe all warnings in this manual and printed on. Please contact a PROEL distributor for assistance with any questions about how to activate the equipment safely. Contact a qualified technician for any maintenance work not described in this manual.
REFERENCE TEMPERATURE The ambient temperature range of use of the device varies between + 5 ° C (min) and + 40 ° C (max), outside of that range the device should not be used. The maximum temperature of the housing Tb = 80 ° C must never be exceeded. Do not block the exhaust fans, ensuring a minimum clearance of 1 meter around the ventilation holes.
RESPIRATORY RISK Direct exposure to the smoke can cause respiratory problems to frail people. Don’t point the smoke output nozzle in direction of the face or, however, height of the face. Don’t create dense smoke curtains in small, poor ventilated, spaces, ensuring at least 2 meters of visibility. Don’t expose people with respiratory problems (asthma, bronchitis, etc.) or allergic to smoke escaping. ATTENZIONE! Don’t touch the smoke output nozzle during and/or after the using.
3. - OPENING AND CONTROL Carefully open the package, check the content and make sure that all the parts are present and are in good condition. In cases where some parts are not present or are damaged, immediately contact Your supplier and retain the packaging for verification. WARNING! If the product has been exposed to drastic temperature changes, let the unit turned off until it reaches room temperature because the presence of condensation can damage the product if it is turned on.
4. - INSTALLATION AND SWITCH ON 4.1 – SMOKE MACHINE INSTALLATION The smoke machine can be installed on the floor resting on the special rubber base feet LAWAYS in a level position, can not be tilted or upside down. It’s not possible to install the device on the wall, ceiling or on a truss. WARNING! Except when the device is placed on the floor, the safety rope (PLH200 sold separately) is always required. 4.
4.3 - CONNECTION TO THE DMX CHAIN Use a cable conforming to specifications EIA RS-485: pole twisted, shielded, 120Ohm characteristic impedance and low capacity (PROEL DMXD – DMXD1). Do not use microphone cable or other cable with different characteristics than those specified. Terminations must be made with male / female XLR 3-pin connectors. You must enter on the last device a terminal plug with a 120Ohm resistance (min1 / 4 W) between terminals 2 and 3.
5.3 – TIMER MODE Through the main menu it’s possible to manually set the main settings of the machine (par. 5.1 – Menu). After setting the desired parameters it’s enough to confirm them by pressing the “SET” button on the keypad; then pressing the button “TIMER” the unit will start the Timer mode and continue cyclically as previously set. To stop the smoke emission it’s needed to press the “SET” button. 5.
7. - TECHNICAL SPECIFICATIONS Power Supply: 230V, 50HZ Power conumption: 1500W Operation Mode: Timer Mode, Manual Mode, DMX512 Tank capacity: 6,0 l DMX: 2 Channels Digital display for address and function setting Dimensions (L x H x D): mm. 570x270x415 270 mm Weight: 18,2 kg Suggested liquid: PROEL Hazer liquid (cod.
Proel S.p.A. Via alla Ruenia 37/43 64027 Sant'Omero (TE) ITALY Tel. +39 0861 81241 Fax. +39 0861 887862 Mail: info@proel.com Web: www.proel.