Instructions / Assembly

! !
WARNING
! !
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY,
DO NOT BEND THE BLADE BRACKETS, WHEN
INSTALLING THE BRACKETS, BALANCING THE
BLADES OR CLEANING THE FAN. DO NOT INSERT
FOREIGN OBJECTS IN BETWEEN ROTATING FAN
BLADES.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR PERSONAL INJURY, MOUNT FAN TO OUTLET
BOX MARKED ACCEPTABLE FOR FAN SUPPORT
WITH THE SCREWS PROVIDED WITH THE
OUTLET BOX.
1
Safety Rules - Read and Save ese Instructions
1. WARNING: To reduce the risk of electric shock, insure electricity has been
turned o at the circuit breaker or fuse box before beginning.
2. All wiring must be in accordance with the National Electrical Code “ANSI/
NFPA 70-1999” and local electrical codes. Electrical installation should be
performed by a qualied licensed electrician.
3. WARNING: To reduce the risk of electrical shock or re, do not use this fan
with any solid-state fan speed control device. It may cause permanent dam-
age to the motor and electronics.
4. CAUTION: To reduce the risk of personal injury, use only the screws pro-
vided with the outlet box.
5. e outlet box and support structure must be securely mounted and capable
of reliably supporting a minimum of 35 pounds. Use only CUL Listed outlet
boxes marked “FOR FAN SUPPORT.”
6. e fan must be mounted with a minimum of 7 feet clearance from the trail-
ing edge of the blades to the oor.
7. Avoid placing objects in path of the blades.
8. To avoid personal injury or damage to the fan and other items, be cautious
when working around or cleaning the fan.
9. Do not use water or detergents when cleaning the fan or fan blades. A dry
dust cloth or lightly dampened cloth will be suitable for most cleaning.
10. After making electrical connections, spliced conductors should be turned
upward and pushed carefully up into outlet box. Turn wire nut connections
upwards, spreading them apart so the green (grounded) wire will be on one
side of the outlet box and the white, black, and blue wires will be on the other
side, and push carefully up into the outlet box.
11. All set screws must be checked and retightened where necessary before
installation.
80009 ∙ 06/23/11 ∙ PCI