Installation manual
Chapter 2: Operation
32 DSC calls
Display for a DSC session
1. Head line showing the type of call that
initiated the DSC session, see table
below for a list of available head lines.
2. Session status line displays the current
state of the session:
•WAIT FOR ACKNOWLEDGE – You
made an individual call to a station and are awaiting a reply to
establish connection.
• OCCUPIED - The DSC transmission mechanism waits until the DSC
channel (70) is free.
• TRANSMITTING - Transmission of a DSC message is ongoing.
• IN COMMUNICATION WITH – The communication has been established.
3. The MMSI number of the other party, if contact to a specific station or
group shall be established.
4. Elapsed time since the reception of a call request or an acknowledgement.
5. Session state:
• (ACTIVE) — transmitter tuned into the communication channel.
•(HOLD) — parked session.
6. Channel used for following communication (if any) when the session is
active.
Headline Explanation
OWN DISTRESS The ship is in own distress. See also Sending a
distress message on page 25.
DISTRESS RX You watch or participate in a distress communication
for another station in distress
RELAY calls
(numerous)
You watch or participate in a distress communication
for another station in distress
INDIVIDUALTX
WAIT FOR ACKNOWLEDGE
MMSI: 278888913
ELAPSED TIME
0:12
(
ACTIVE
)
CHANNEL
:15
LO CH:15
QUIT
INFO
MORE
HOLD
1
2
3
4
5
6