Specifications

The following functions are available in the CU5000:
- Volume control (including external loudspeaker)
- Squelsh control
- Dimming
- Channel selection (scroll up and down, with auto stop on Channel 16)
- 25W to 1W switch button
- Replay
- Mute alerts
Only relevant features are available, thus making the operation of the CU5000 very easy.
The CU5000 is designed for and tested as “exposed equipment”, including water resistance according to
IP66, as mentioned in the paragraph about the HS5001.
The large 7-segment display is almost identical with the display of the RT5022, making the identification
and operation intuitive. The buttons are large, but has been modified in order not to make the CU5000 to
big. The volume- and squelch knobs on the RT5022 have been changed to scroll buttons, in order to
make them water resistant.
The CU5000 includes one HS5001. The HS5001 is connected to the Control Unit by a spiral cable making it
easy to install in an ideal position. The cable cannot be dismounted from the Control Unit as it is sealed
in order to prevent water ingress. The CU5000 is supplied with a fixed cable for connection to the
CB5009.
The dimensions of the Control Unit are 100x100x36 mm. The HS5001 is separated from the unit to secure
easy and flexible installation.
3.11 Connection box CB5009
The CB5009 has been developed for easy installation and integration
of accessories and other peripheral equipment. Such equipment can
be the GPS (for position input), an external loudspeaker (e.g. the
LS4970), the LAN box LB5007, the Alarm Panel AP4365, or the
CU5000. The CB5009 is designed for easy installation of ship’s
cabling.
3.12 Extension box EB5008
The EB5008 is used for installing an external loudspeaker near the CU5000.
This will also allow the user to control the volume in the external
loudspeaker from the CU5000.
Sales Introduction SAILOR RT5022 – Version 1.0 HFY
Thrane & Thrane, April 6
th
2005 Page 12 of 19