Specifications

9. Technical specification
The SAILOR RT5022 fulfills and exceeds the technical specifications required by the authorities.
9.1 General
Channels All Int, US and BI channels.
Up to 30 private channels in 3 separate banks designated
F,P or L. Each bank contains 10 private channels.
Channel spacing 25 kHz
Operation modes Simplex /Semi-duplex
Modulation G3EJN for Telephony
G2B for DSC.
Frequency stability Better than ± 3 ppm
Aerial connectors Standard 50 ohm female SO239
Temperature range -15 ºC to +55 ºC
Supply voltage 12V to 24V DC nominal
Supply voltage range 10.8V to 31.2V DC
Transceiver dimensions H*W*D 100*200*210 mm
Transceiver weight 3.6 Kg
9.2 Receiver
Frequency range 149.30 – 163.75 MHz
Sensitivity for 20 dB SINAD CCITT weighted Below -121 dBm or 0.20 µV p.d.
AF rated Power Internal L.S. 5 watt in 8 ohm
Output for External L.S. 5 watt in 8 ohm
Distortion Less than 5 %
S/N ratio Better than 43 dB
Spurious emission Less than 0.25 nW
Spurious response rejection Better than 74 dB
Intermodulation response Better than 73 dB
Co- channel rejection Better than –10 dB
Adjacent channel selectivity Better than 74 dB
Blocking level Better than 94 dBµV
9.3 Transmitter
Frequency range 149.30 – 163.75 MHz
RF output power
High 25W +0dB to –0.5dB
Low 0.85 W +0.5dB to –1dB
Adjacent channel power Better than 75 dB
Conducted spurious emission Better than 0.1 µW
Distortion Better than 5 %
S/N ratio Better than 46 dB
Sales Introduction SAILOR RT5022 – Version 1.0 HFY
Thrane & Thrane, April 6
th
2005 Page 17 of 19