How to Guide

SAINT-GOBAIN ADFORS
America, Inc.
1795 Baseline Road
Grand Island, NY 14072 - USA
Phone: [phone]
Fax: [phone]
www.adfors.com
1. Lay screen over frame on flat surface,
overlapping spline groove at least 2”
on all four sides.
1
3. Trim off excess screen with utility
knife on outside edge of the spline
groove.
3
Choose the right screen
for the job
Saint-Gobain ADFORS offers a
variety of specialty screen types
to meet any need.
Clear Advantage
TM
Best visibility - allows
more natural light
Recommended spline .140
Extra Strength
Long lasting durability
Recommended spline .140
Pet Resistant
Withstands damage
from household pets
Recommended spline .125
Small Insect
Greater protection from
tiny insects
Recommended spline .140
Sun Guard
Controls the damaging
effects of the sun
Recommended spline .140
Also available
• Standard Fiberglass
Recommended spline .140
• Aluminum
Recommended spline .125
• Screen at least 2” (5 cm)
wider than screen frame
• New spline
• Screen tool
• Utility knife
How To Replace Screen
2. A: For aluminum screen, use the
convex end of screen tool to gently
roll screen into the frame groove to
crease the screen.
B: Using concave end of screen tool,
insert spline at one corner and roll
into groove over screen. Place hand
on screen surface to hold screen
straight. Roll spline into groove on all
four sides.
2
BA
Visit www.adfors.com to learn more about our products, view our how-to
videos, and use our screen selector tool to make sure you have the right
screen for your needs.
Tools & materials required: