Instructions / Assembly

0000 9/15
SAINT-GOBAIN ADFORS America, Inc.
1795 Baseline Road
Grand Island, NY 14072 - USA
Phone: [phone]
Fax: [phone]
www.adfors.com
How To Replace Screening
Tools & Materials Required:
• Screening at least 2” (5 cm) wider
than screen frame
• New spline
Choose the Right
Screen for the Job
Saint-Gobain ADFORS oers a
variety of specialty screen types
to meet any need.
Clear Advantage
Nearly invisible screen
allows more light and
enhances curb appeal
Extra Strength
Extend the life of
your screen
Pet Resistant
Withstands damage from
household pets
Small Insect
Greater protection from
tiny insects
Sun Guard
Controls the damaging
eects of the sun
Also Available
• Standard Aluminum
• Standard Fiberglass
Follow us on:
Visit www.adfors.com to learn more about our products, view our how-to videos and use our screen selector tool to
make sure you have the right screen for your needs.
1. Lay screening over frame on at
surface, overlapping spline groove
at least 1” on all four sides.
2. Using concave end of screen tool,
insert spline at one corner and roll
into groove over screening. Place
hand on screen surface to hold
screen straight. Roll spline into
groove on all four sides.
3. Trim o excess screening with
utility knife on outside edge of the
spline groove.
1
2
3
• Screen tool
• Utility knife