Instructions / Assembly

Wall Repair Patch
Instructions
SAINT-GOBAIN ADFORS
America, Inc.
1795 Baseline Road
Grand Island, NY 14072 - USA
Phone: [phone]
Fax: [phone]
www.adfors.com
1. Select patch size 1/2” larger than the hole on all sides.
2. Clean repair surface area removing any loose debris. Wipe away
dust.
3. Peel away patch liner and apply patch to surface. Center patch
over the hole. Press down rmly on all edges.
4. Using taping knife, apply compound. Feather around edges,
concealing the patch. Allow to dry.
5. Sand repair site lightly, then apply a thin nishing coat of com-
pound. Allow to dry.
6. Sand to a smooth nish. Additional nish coats may be applied
as needed.
7. Prime and paint.
• Wall repair patch
• Taping knife
• Joint compound
• Sandpaper or sponge
Materials Needed:
Instructions:
Time Required: 15 min + dry time
Skill Level: Easy