Use and Care Manual

Item
1
2
3
4
5
6
7
8
9
Description
Mainbody
Screw cap
Snaps
Clasp
Screw
Plastic Shim
Plastic Shim
Flag
Presser
Qty
1
4
1
1
4
1
1
1
1
ASSEMBLY INSTRUCTIONS:
TOOLS REQUIRED:
Screw Driver
Please read the cooler manual carefully and assemble according to
following steps.
1. Please make sure all parts are accounted for before
beginning assembly
2. Place main basin (Part1) up-side down on clean soft
surface
3. Attached the snaps (Part3) and clasp (Part4) to mainbody
using 2 screws tighten with screw-driver
4. Attached the flag (Part8),presser (Part9) and two plastic
shim (Part7 & Part6) to main body according to the order
of the picture using 2 screws tighten with screw-driver
3112 Seaborg Ave., Unit C,
Ventura, CA 93003
Tel: [phone]
Fax: [phone]
[e-mail]
Sainty International, LLC.
SAINTY ART WORKS
SAINTY ART WORKS
MAIL BOX
1
2
3
4
5
6
5
9
8
7