User manual

ManualsBrandsSaitek ManualsVideo Game ControllerCyborg 3D

3 At the Saitek Gaming Extensions screen, click on Install and follow the on-screen

instructions and then restart your computer.

4 When you are prompted, attach your Saitek Cyborg 3D Stick to the computer (using the

USB connector if you have the option) and follow the on-screen instructions.

5 When the Test screen appears, test your controller ’s buttons and attributes. Your Saitek

Cyborg 3D Stick is now ready for gameplay, but first you should take time to run the Game

Profile Wizard to get the most from your new controller (see next section).

Important Notice: If you connect the Cyborg 3D Stick, using the USB connector, before installing

the Saitek Gaming Extensions software, the Saitek Cyborg 3D Stick will not function correctly.To

solve this problem, run the NukeUSB utility (found on the Saitek Product Companion Disc CD) to

remove the Cyborg 3D Stick from the Registry, restart the machine and then continue the installa-

tion as detailed above.

Game Profiler Wizard

The Game Profiler Wizard allows you to download game profiles for your favorite games from

either the Saitek Product Companion CD or the Saitek Website. These are profiles written by our

in-house gamers to help you get the most from you new Saitek controller in as little time as possi-

ble. To run the Game Controller Wizard, follow these simple instructions:

1 After you have completed testing your Saitek Cyborg 3D Stick, you will then be asked to run

the Game Profiler Wizard, click on Yes to proceed.

2 At the Welcome dialog box you will be prompted to Import the Game Profiles for your con-

troller via either the Internet or the CD. Check the box next to CD and click on Continue. The

software will scan your computer for those games you already have loaded and will load the

corresponding profiles.

3 When the Game Profiler Wizard has completed loading the profiles, click on Next and then

Finish. Your Saitek Cyborg 3D Stick is now ready for gameplay.

Important Notice: If you connect the Cyborg Stick before installing the Saitek Gaming Extensions

software, the Saitek Cyborg Stick will not operate correctly.To solve this problem, run the

NukeUSB utility (found on the Saitek Product Companion Disc CD), remove the Cyborg Stick,

restart the machine and then continue the installation in the correct order.

Note:To avoid potential problems and conflicts, it is recommended that you remove any other

game controllers from the Game Controllers dialog box. Do this by selecting the previously

installed controller in Game Controllers and clicking on Remove.

Minimum System Requirements

To operate the Saitek Cyborg 3D Stick you will need a Pentium class computer with 32Mb of RAM

with a minimum of Windows® 95 installed (Windows® 98 for USB operation). Microsoft Internet

Explorer 4.x and DirectX 7.0a or above are required to get the most from your games and con-

troller. These are available on the Saitek Product Companion Disk that came with this product.

Games Compatibility

Your Saitek Cyborg 3D Stick is specifically designed to work in Microsoft Windows 95/98. However,

your controller will also work with some DOS-based games.

Getting Started

Dual Compatibility for USB and Game Port Connection

Important Notice: Connect your controller using only ONE of the connectors.

The Saitek Cyborg 3D Stick comes with a choice of two connectors. You can either connect with

the conventional game port connector or, if your computer has the capability, connect via the USB

(Universal Serial Bus) connector. It is strongly recommended that if you have USB capability on

your computer, you should use that connector to attach this device.

The USB connector has many benefits over the older game port connector and is rapidly becoming

the standard interface connection for quality computers.

Important Notice: Connect your controller via only ONE of the above methods.

Installing your Saitek Cyborg 3D Stick

Important Notice:You must install the software from the Saitek Product Companion Disc before

you connect your game controller to the PC.

1 With your computer switched on, close down any programs you are running and insert the

Saitek Product Companion Disc.

2 When the Saitek Product Companion Disc Dialog Box appears, select your Saitek Cyborg 3D

Stick from the drop down list and click on the Install button.

3 In the next dialog box, click on Yes to agree with the installation of the Saitek Cyborg 3D

Stick and then click on Accept to agree to the license agreement.

Note: For your Saitek Cyborg 3D Stick to work, you need to have a minimum of Microsoft®

Internet Explorer 4 and DirectX 7.0a installed on your machine. This installation will automatically

recognize if you already have them loaded on to your machine. However, if they are not present,

you will need to take the following steps:

• If you are prompted to install Microsoft® Internet Explorer, click on Install and follow the

on-screen instructions and then restart your computer when prompted.

• If you are prompted to install Microsoft® DirectX 7.0a, click on Install and follow the

on-screen instructions and then restart your computer when prompted.

Summary of content (5 pages)

PAGE 1
Minimum System Requirements To operate the Saitek Cyborg 3D Stick you will need a Pentium class computer with 32Mb of RAM with a minimum of Windows® 95 installed (Windows® 98 for USB operation). Microsoft Internet Explorer 4.x and DirectX 7.0a or above are required to get the most from your games and controller. These are available on the Saitek Product Companion Disk that came with this product.
PAGE 2
Figure 2 - Head / Palm Rest Adjustments Adjustment pin for head tilt Tilt adjustment plate Adjustment screw for head roll Adjustment screw for palm rest Figure 1 - Cyborg Controls 8 Way Hat Fire Button C Fire Button B Fire Button A Trigger Throttle Right Shift Button F2 Button Figure 3 - Cyborg Throttle Adjustment F4 Button F1 Button Adjustment screw for throttle F3 Button Left Shift Button Adjustment screw for throttle 2 Saitek adjustable tool 3
PAGE 3
Adjusting the stick for left handed use Thumb length adjustment The control head has three tilt positions, these are adjusted by a three position spring loaded pin located on the left side of the joystick, above the main trigger (see figure 5). Fig.
PAGE 4
L Roll the head, so that the locating pin is between two of these lugs, and pull the control head back towards the front of the stick. The control head should not be able to move when it is rolled left or right. 3 You will now see a list of all the .exe files on your PC to which SGE can be assigned. Highlight the name of the game you wish to create a profile for, eg, tomb4.exe, then click on Next. L Tighten the adjustment screw by 3 complete turns.
PAGE 5
Contacting Saitek If you do not have access to the Internet, or if the Website cannot answer your question, you will need to contact your local Saitek Technical Team. However, before contacting Technical Support, here are a few tips to help us to help you: Trouble-shooting Problem My computer is not recognizing the controller - what’s wrong? Check the cable connections. Turn off the computer and then unplug your controller. Plug it back in making certain that is securely attached.