Specifications

32
Section 11: Lower Air Intake Installation
Required Parts
• Air scoop • Plastic guide tubes (2)
• Plywood tube locators (2)
Required Tools and Adhesives
• Medium CA • Thick CA
• Razor saw • Hobby knife
• Felt-tipped pen • Medium grit sandpaper
Step 1
Use a felt-tipped pen to trace around the heads of
the wing bolts.
Step 2
Remove the wing bolts from the wing. Locate the
plywood tube locators and use medium CA to glue the
locators in position. Use the lines drawn around the
bolt heads as a guide.
Step 3
Place a piece of wax paper between the fuselage and
wing, then bolt the wing onto the fuselage.
Step 4
Use medium grit sandpaper to lightly sand the inside
edge of the air scoop.