Specifications

4
Warning
Other Items Needed (not included in the kit)
Additional Required Tools and Adhesives
Tools
• Drill
• Drill Bits: 1/16", 1/8", 3/32", 5/64”, 5/32"
• Phillips screwdriver (small, medium)
• Pliers
• Side Cutters
• Moto-tool w/cut-off wheel
• Hobby knife with #11 blade
• 90-degree triangle
• Straight edge
• Canopy scissors
• Side cutters
• Adjustable wrench
• Hex wrench
Other Required Items
• Mixing sticks for epoxy
• Epoxy brushes
• Rubbing alcohol
• Sanding bar
• Sandpaper (medium)
• Paper towels
• Wax paper
• Felt-tipped pen or pencil
• Measuring device (e.g. ruler, tape measure)
• T-pins
• String
• Radio packing foam
• Petroleum jelly
Adhesives
• Thin CA (cyanoacrylate) glue
• Thick CA (cyanoacrylate) glue
• CA remover/debonder
• 6-minute epoxy
• 30-minute epoxy
• Pacer Z-42 Threadlock
• Canopy glue (RC-56)
• Masking tape (3M blue recommended)
• Propeller (consult your engines instruction manual)
• 24” Servo Lead Extension (JRPA102)
• 6” Servo Lead Extension (JRPA094)
An RC aircraft is not a toy! If misused, it can cause serious bodily harm and damage to property. Fly only in open areas,
preferably at AMA (Academy of Model Aeronautics) approved flying sites, following all instructions included with your
radio and engine.
• Large servo arm (JRPA212) (2)
• Propeller (consult your engines instruction manual)
• 5" P-51 Spinner