Specifications

42
Section 16: Fuel Tank Assembly
Step 2
Locate the rubber stopper. Insert the shorter metal fuel
tube into one of the holes in the stopper so that an
equal amount of tube extends from each side of the
stopper. This tube will be the fuel tank pickup that
provides fuel to the engine.
Step 3
Slide the smaller cap over the tube on the smaller end of
the rubber stopper. This end will be inserted into the fuel
tank. The larger cap is placed on the side of the rubber
stopper that makes the cap. Loosely install the M3 x 20
screw through the center of the stopper.
Step 4
Bend the longer fuel tube carefully to a 45-degree angle
using your fingers. This will be the fuel tank vent tube.
Use care not to kink the tube while bending.
Step 5
Slide the vent tube into on of the remaining two holes in
the stopper from the tank (small cap) side.
Step 6
Locate the short piece of silicone fuel tubing and the
fuel tank clunk. Install the clunk onto one end of the
silicone tubing. Slide the silicone tubing (end opposite
the clunk) onto the fuel tank pickup tube (straight tube)
in the stopper.