Specifications

Section 17B: Engine Installation (Saito 200 TI)
47
Important: The stock engine mount is offset
1/4" towards the top of the fuselage. Measure
1/4" towards the bottom of the fuse and make
two marks for the horizontal centerline.
Step 4
Connect the marks drawn in the previous step. Your new
engine mount will centered here the two lines cross.
Step 5
Measure and record the distance between the holes in
your particular mount. Make sure your mount will be
centered correctly when measuring.
Step 6
Transfer the measurements made in the last step to
the firewall. Remember to divide by two and measure
from the centerline.
Note: Another option is to determine the
center vertically and horizontally of your
mount. Position the mount on the centerlines
and mark the locations of the bolts directly
on the firewall.