User manual

User Manual

6.2 Startup the Inverter

Suntrio inverter can be congured for various countries, if it is the rst time the inverter starts

up after installation, LCD will quickly switch to and stay at the country setting interface. Only

the inverter is set to comply with a certain country, it will work and display normally. Otherwise,

LCD will always stay at the “Please Set The country First” interface.

There are 28 countries for choosing

1 Australia 15 Italy

2 Austria 16 Portugal

3 Belgium 17 China

4 Brazil 18 Thailand

5 Denmark 19 Default

6 Finland 20 Hungary

7 France 21 Croatia

8 Luxembourg 22 Czech Republic

9 Netherland 23 Germany

10 Norway 24 Israel

11 Poland 25 Greece

12 Sweden 26 Malaysia

13 Switzerland 27 New Zealand

14 UK 28 Spain

Note: if you can’t find the country you want, please directly select ‘Default’.Default mode

represent the VDE 0126-1-1.

After Country conguration, Inverter will have a self-check when starting up. If no malfunction

is found and grid connection requirement is met, inverter LCD will go to the countdown screen,

as shown in Figure 6.2.