International Digital Camera Owner's Manual 88379

- 5 -
Preparing Your Camera for Use
Battery Installation
Your camera requires two AA alkaline batteries, which must be inserted as follows:
1. Slide open the battery compartment at the bottom of the camera in the direction
indicated by the arrow.
2. Insert the batteries in accordance with the polarity (+/-) shown on the inside of the cover.
3. Close the battery compartment.
The LCD will flash if your batteries are running low in which case you will need to replace the
camera’s batteries before taking photos. When the battery voltage drops below 2.2V, the LCD
will display “Lo” and then automatically switch off.
Note: If you do not intend to use your camera for an extended period, remove the battery to
avoid leakage and corrosion.
Warning:
• Please download any photos you have on the camera before opening the battery
compartment.
• Opening the battery compartment and/or removing the battery will erase the photos
currently stored in the camera.