User Guide

Clear out the broken concrete area.

This may require chiseling out any concrete

pieces that feel or appear to be loose or

unstable.

Once the loose and unstable concrete has been removed, dampen

the repair area with water. This will prevent the dry existing concrete

from pulling the moisture from the repair material too quickly which

weakens the bond.

PREPARATION

APPLICATION

Mix the Sakrete Fast Setting Cement Patcher according to the mixing

instructions. Add the dry material to the container of water to ensure

proper material mixing.

Using a margin trowel, thoroughly mix the material until all lumps have

disappeared. Once mixed, use the trowel to place the material in the

repair area and work the material into the voids and pockets underneath.

The Pro’s Choice Since 1936

repair a broken concrete corner

using Fast Setting Cement Patcher

Project how-to guide

Sakrete.com • 866-725-7383

PAGE 1
repair a broken concrete corner using Fast Setting Cement Patcher Project how-to guide The Pro’s Choice Since 1936 PREPARATION Clear out the broken concrete area. This may require chiseling out any concrete pieces that feel or appear to be loose or unstable. Once the loose and unstable concrete has been removed, dampen the repair area with water. This will prevent the dry existing concrete from pulling the moisture from the repair material too quickly which weakens the bond.
PAGE 2
repair a broken concrete corner using Fast Setting Cement Patcher Project how-to guide The Pro’s Choice Since 1936 Continue filling the void until the repair material is even with the existing concrete slab. FINISHING Using a finishing trowel, smooth off the surface of the repair, scraping away any excessive material. Use the trowel to put a neat edge on the patch and remove material from the joint area.