How to Guide

MIX ACCORDING TO DIRECTIONS ON THE

PAIL.

NOTE: This is a fast-setting product.

Mix only small amounts.

Once the product has begun to stiffen, force a large amount of product

into the hole. Overll the hole and the surrounding area.

Using gloved hands, work the product back and forth between hands

until the product begins to stiffen.

PREPARATION

APPLICATION

The Pro’s Choice Since 1936

plugging water leaks

using Leak Stopper

Project how-to guide

Sakrete.com • 866-725-7383

PAGE 1
plugging water leaks using Leak Stopper Project how-to guide The Pro’s Choice Since 1936 PREPARATION MIX ACCORDING TO DIRECTIONS ON THE PAIL. NOTE: This is a fast-setting product. Mix only small amounts. APPLICATION Using gloved hands, work the product back and forth between hands until the product begins to stiffen. Once the product has begun to stiffen, force a large amount of product into the hole. Overfill the hole and the surrounding area. 1 Sakrete.
PAGE 2
plugging water leaks using Leak Stopper Project how-to guide The Pro’s Choice Since 1936 FINISHING Allow the product to harden for 1-2 minutes. Scrape off the excess using a trowel. Using a wet rag, remove any excess material so the patch is flush with the surface. NOTE: For complete product information, please refer to the product data sheet. 2 Sakrete.