User Guide

Mix product according to package

instructions.

Wet the area to be repaired. This will

prevent the concrete from absorbing the

water from the Fast Setting Cement Patcher.

Place some of the material, by hand, on the damaged area.

** BE SURE TO WEAR GLOVES **

Mix the material to a wet consistency (slurry coat).

This will help the product bond to the existing concrete.

PREPARATION

APPLICATION

The Pro’s Choice Since 1936

Repairing broken or damaged

concrete using Fast Setting Cement Patcher

Project how-to guide

Sakrete.com • 866-725-7383

PAGE 1
Repairing broken or damaged concrete using Fast Setting Cement Patcher Project how-to guide The Pro’s Choice Since 1936 PREPARATION Mix product according to package instructions. Wet the area to be repaired. This will prevent the concrete from absorbing the water from the Fast Setting Cement Patcher. APPLICATION Mix the material to a wet consistency (slurry coat). This will help the product bond to the existing concrete. Place some of the material, by hand, on the damaged area.
PAGE 2
Repairing broken or damaged concrete using Fast Setting Cement Patcher Project how-to guide The Pro’s Choice Since 1936 Add additional product to the mix to create a thicker consistency. FINISHING Place the material on the damaged area using a margin trowel. As it begins to stiffen, shape the material shape the material to form the corner. Complete the repair by using a damp paintbrush to smooth any existing seams and blend the repaired area into the existing concrete.