How to Guide

MIX ACCORDING TO DIRECTIONS ON

CONTAINER.

NOTE: This is a rapid setting product.

Only mix the amount needed.

Anchor Cement will set in just 20 minutes.

Pour the product into the hole, ﬁ lling it completely.

If used in an environment where the patch will get wet, overﬁ ll the hole

slightly. As it stiffens, gently slope the material so water moves away

from the patch.

PREPARATION

APPLICATION

NOTE: For complete product information, please refer to product data sheet.

The Pro’s Choice Since 1936

Anchoring Bolts & Railings

Project how-to guide

Sakrete.com • 866-725-7383