User Guide

PREPARATION

Determine that your repair area is within

the manufacture’s spec for minimum and

maximum repair depths.

(For deep repairs, Top’n Bond can be used in multiple lifts of

up to 1/2 in. at a time. Sakrete Backer Rod can also be used to

ll voids.)

Using a garden hose, remove any dirt or debris from

the crack. For more severely damaged concrete a

pressure washer may be needed.

APPLICATION

Crack Repair

Mix product according to package instructions.

Sakrete Top’n Bond can be hand mixed for small repairs but can also

be drill mixed when using full bags for large repairs.

Start this repair by lling the crack with Sakrete Top’n Bond.

By using a margin trowel for this step, the repair material will be easily

manipulated when pressed into the open crack.

The Pro’s Choice Since 1936

Repairing a Raised Concrete Surface

using Top ‘n Bond Concrete Patcher

Project how-to guide

Sakrete.com • 866-725-7383

PAGE 1
Repairing a Raised Concrete Surface using Top ‘n Bond Concrete Patcher Project how-to guide The Pro’s Choice Since 1936 PREPARATION Determine that your repair area is within the manufacture’s spec for minimum and maximum repair depths. (For deep repairs, Top’n Bond can be used in multiple lifts of up to 1/2 in. at a time. Sakrete Backer Rod can also be used to fill voids.) Using a garden hose, remove any dirt or debris from the crack. For more severely damaged concrete a pressure washer may be needed.
PAGE 2
Repairing a raised Concrete surface using Top ‘n Bond Concrete Patcher Project how-to guide The Pro’s Choice Since 1936 APPLICATION Raised surface repair Tape off an area around the repair that will allow the raised section to be adequetly leveled off and feather edged. This step will also ensure a neat and clean transition area when it’s time to remove the tape. Apply Top’n Bond to this section and smooth out the material with a straight edge trowel. Remove the tape and begin smoothing out the repair.