User Guide

Clear out chipped or loose concrete from the repair

area. This may require a hammer and chisel to

break away loose or unstable pieces.

It may be necessary to widen the crack in some places. Once the area has

been prepared, sweep away all loose concrete debris

PREPARATION

APPLICATION

To ensure the area is adequately prepared for the repair, use a pressure

washer or water hose to clean the porous area of dirt and surface built-up.

This will contribute to obtaining a good bond between the existing concrete

and the repair material.

Follow the mixing instructions from the pail and mix the dry powder to the

water requirements to ensure the material mixes properly. Using a margin

trowel, thoroughly mix the material until all lumps have disappeared.

The Pro’s Choice Since 1936

repair large cracks in concrete

using Fast Setting Cement Patcher

Project how-to guide

Sakrete.com • 866-725-7383

PAGE 1
repair large cracks in concrete using Fast Setting Cement Patcher Project how-to guide The Pro’s Choice Since 1936 PREPARATION Clear out chipped or loose concrete from the repair area. This may require a hammer and chisel to break away loose or unstable pieces. It may be necessary to widen the crack in some places.
PAGE 2
repair large cracks in concrete using Fast Setting Cement Patcher Project how-to guide The Pro’s Choice Since 1936 Using the margin trowel, place the material in the crack. In thin sections it may be necessary to turn the trowel sideways to ensure the void is filled. FINISHING Continue using the trowel to fill the voids. It may become necessary to use a finishing trowel and apply pressure to fill some of the voids. Once the voids are filled, use the trowel to smooth the surface.