How to Guide

NO MIXING IS REQUIRED.

Remove sand to the full depth of the

pavers. Be sure all weeds are removed.

NOTE: Product is suitable for new

paver installations as well as existing

installations.

Use a container, bag or funnel to pour the product into the paver joints.

This will help reduce the risk of staining the pavers.

Tap on the pavers to consolidate the material into the joints.

Ensure that no pavers were dislodged during pressure washing. The

wash the surface of the pavers with a cleaning solution.

Wait until the surface is completely dry before adding Paver Set

(usually the next day).

PREPARATION

APPLICATION

The Pro’s Choice Since 1936

filling joints between pavers

using Paver Set Polymeric Sand

Project how-to guide

Sakrete.com • 866-725-7383

PAGE 1
filling joints between pavers using Paver Set Polymeric Sand Project how-to guide The Pro’s Choice Since 1936 PREPARATION NO MIXING IS REQUIRED. Remove sand to the full depth of the pavers. Be sure all weeds are removed. NOTE: Product is suitable for new paver installations as well as existing installations. APPLICATION Ensure that no pavers were dislodged during pressure washing. The wash the surface of the pavers with a cleaning solution.
PAGE 2
filling joints between pavers using Paver Set Polymeric Sand Project how-to guide The Pro’s Choice Since 1936 FINISHING Once all Paver Set has been placed into the joints, use a broom to remove all excess product and prevent staining. Product may also be removed using a leaf blower by placing the tip just above the pavers (preferred method instead of sweeping). NOTE: This step is critical to avoid staining the pavers.