How to Guide

Once all Paver Set has been placed into the joints, use a broom
to remove all excess product and prevent staining.
Product may also be removed using a leaf blower by placing
the tip just above the pavers (preferred method instead of
sweeping).
NOTE: This step is critical to avoid staining the pavers.
Gently mist the pavers using a wide, sweeping motion and
avoid spraying directly into the joints. Spray for several minutes
allowing the water to soak in. Repeat the process 3 or 4 times
over a one-hour period.
Restrict access to the pavers for at least 24 hours.
NOTE: Do not allow the water to pool in the joints.
FINISHING
NOTE: For complete product information, please refer to product data sheet.
The Pro’s Choice Since 1936
filling joints between pavers
using Paver Set Polymeric Sand
Project how-to guide
Sakrete.com • 866-725-7383
2