User Guide

Mix product according to package

instructions.

Using a garden hose, remove any dirt or

debris from the crack. For more severely

damaged concrete a pressure washer may

be needed.

Add additional dry material to the mix to increase the consistency.

Using a margin trowel, add more product to the damaged area.

Place material in the cracked area. This will help ensure a good bond.

** BE SURE TO WEAR GLOVES **

PREPARATION

APPLICATION

The Pro’s Choice Since 1936

repairing cracks & Spalls in concrete

using Top ‘n Bond Concrete Patcher

Project how-to guide

Sakrete.com • 866-725-7383

PAGE 1
repairing cracks & Spalls in concrete using Top ‘n Bond Concrete Patcher Project how-to guide The Pro’s Choice Since 1936 PREPARATION Mix product according to package instructions. Using a garden hose, remove any dirt or debris from the crack. For more severely damaged concrete a pressure washer may be needed. APPLICATION Place material in the cracked area. This will help ensure a good bond. ** BE SURE TO WEAR GLOVES ** Add additional dry material to the mix to increase the consistency.
PAGE 2
repairing cracks & Spalls in Concrete using Top ‘n Bond Concrete Patcher Project how-to guide The Pro’s Choice Since 1936 FINISHING Using a margin trowel, scrape off the excess product Apply the finishing touches to the area using a paint brush to blend the Top N Bond material to the existing concrete. NOTE: For complete product information, please refer to product data sheet. 2 Sakrete.