User Manual

A. Attach Hinges to Door Frames

Insert the hinges into the corresponding holes on

the doors. Turn the screws 1/4 turn to the right to

lock hinges in place. NOTE: Do not over tighten

or the hinge will break.

D. Door Pull

Screw the Door Pull into place.

B. Adjust Clearance

Doors should be 1/8” above the bottom shelf before

fully tightening hinges to post. Use the wrench thickness

as a guide for the bottom gap. Secure hinges in place

with hex key.

C. Rubber Stops

Attach the rubber stops to the inside of the door

frame where it hits the shelf pegs.

Attach Doors

Note: The hinge can be separated by pulling the

black tab and pulling apart the hinge from the

hinge base. Separated hinges snap back together.

PULL

SHELF

PEG

Doc No. 501-090/v6.18 245 -3 of 4