Reference Guide
Right-End Left-End Armless Straight and Wedge
Arm Connectors
Modules
End chairs combine with chair connectors or armless chairs for straight or wedge shaped rows.
Two armless Talia modules can be joined without arm connectors.
Specifications
• Wall-away recliner mechanism allows close-to-
wall positioning
• Fully-adjustable, motorized* recliner or 3-position
manual recliner or non-reclining mechanism
• Leather or Microsuede covers
• Tailored, piping with optional contrast piping
• Black, silver or no cup holder
* Power Mechanism Electrical Specications: 110 V AC, 2.0
amps nominal load, 5.0 amps max load, thermally protected
A = 36” Recommended Row Spacing
Footrest to headrest without walk through.
78.5” deep platform recommended with 7” riser step typical.
B = 3” Seat Back Wall Clearance
TALIa
D E F I NING ORIG INAL
™
DEFINING ORIGINAL
™
MODULAR SEATING
Modular Solutions
Design & Quote Custom
Theater Seating Online with our
CustomCongurator
SalamanderDesigns.com
Dimensional Tolerance:
Allow 1/2” (12mm) to each chair for cushion variation.
38”
24.5”
24”
18.5”
3”
Seat Back Recline
21”
40”
40.5”
34.5”
63.5”
22”
19.5”
39.5”
32.25” 32.25”
24.5”
6.75”
13”
Right-End Left-End Armless Straight & Wedge
Arm Connectors
12.55°
© 2014 Salamander Designs Ltd.
The information and designs contained in this drawing propietary of SALAMANDER DESIGNS
and may NOT be reproduced. Specifications subject to change with
out notice.
Rev 4/13.
www.salamanderdesigns.com
TALIA
B = 3” Seat Back Wall Clearance
RISERS AND ROWS
72” deep platform recommended with 7” riser step typical.
A = 36” Recommended Row Spacing
(Measured with chair in upright position)
AB
24”
38”
24.5”
24”
18.5”
3”
Seat Back Recline
21”
40”
40.5”
34.5”
63.5”
22”
19.5”
39.5”
32.25” 32.25”
24.5”
6.75”
13”
Right-End Left-End Armless Straight & Wedge
Arm Connectors
12.55°
© 2014 Salamander Designs Ltd.
The information and designs contained in this drawing propietary of SALAMANDER DESIGNS
and may NOT be reproduced. Specifications subject to change with
out notice.
Rev 4/13.
www.salamanderdesigns.com
TALIA
B = 3” Seat Back Wall Clearance
RISERS AND ROWS
72” deep platform recommended with 7” riser step typical.
A = 36” Recommended Row Spacing
(Measured with chair in upright position)
AB
24”
38”
24.5”
24”
18.5”
3”
Seat Back Recline
21”
40”
40.5”
34.5”
63.5”
22”
19.5”
39.5”
32.25”
32.25”
24.5”
6.75”
13”
Right-End
Left-End Armless Straight & Wedge
Arm Connectors
12.55°
© 2014 Salamander Designs Ltd.
The information and designs contained in this drawing propietary of SALAMANDER DESIGNS
and may NOT be reproduced. Specifications subject to change with
out notice.
Rev 4/13.
www.salamanderdesigns.com
TALIA
B = 3” Seat Back Wall Clearance
RISERS AND ROWS
72” deep platform recommended with 7” riser step typical.
A = 36” Recommended Row Spacing
(Measured with chair in upright position)
AB
24”
38”
24.5”
24”
18.5”
3”
Seat Back Recline
21”
40”
40.5”
34.5”
63.5”
22”
19.5”
39.5”
32.25”
32.25”
24.5”
6.75”
13”
Right-End
Left-End
Armless Straight & Wedge
Arm Connectors
12.55°
© 2014 Salamander Designs Ltd.
The information and designs contained in this drawing propietary of SALAMANDER DESIGNS
and may NOT be reproduced. Specifications subject to change with
out notice.
Rev 4/13.
www.salamanderdesigns.com
TALIA
B = 3” Seat Back Wall Clearance
RISERS AND ROWS
72” deep platform recommended with 7” riser step typical.
A = 36” Recommended Row Spacing
(Measured with chair in upright position)
AB
24”
38”
24.5”
24”
18.5”
3”
Seat Back Recline
21”
40”
40.5”
34.5”
63.5”
22”
19.5”
39.5”
32.25” 32.25”
24.5”
6.75”
13”
Right-End Left-End
Armless
Straight & Wedge
Arm Connectors
12.55°
© 2014 Salamander Designs Ltd.
The information and designs contained in this drawing propietary of SALAMANDER DESIGNS
and may NOT be reproduced. Specifications subject to change with
out notice.
Rev 4/13.
www.salamanderdesigns.com
TALIA
B = 3” Seat Back Wall Clearance
RISERS AND ROWS
72” deep platform recommended with 7” riser step typical.
A = 36” Recommended Row Spacing
(Measured with chair in upright position)
AB
24”
38”
24.5”
24”
18.5”
3”
Seat Back Recline
21”
40”
40.5”
34.5”
63.5”
22”
19.5”
39.5”
32.25” 32.25”
24.5”
6
.75”
13”
Right-End Left-End Armless Straight & Wedge
Arm Connectors
12.55°
© 2014 Salamander Designs Ltd.
The information and designs contained in this drawing propietary of SALAMANDER DESIGNS
and may NOT be reproduced. Specifications subject to change with
out notice.
Rev 4/13.
www.salamanderdesigns.com
TALIA
B = 3” Seat Back Wall Clearance
RISERS AND ROWS
72” deep platform recommended with 7” riser step typical.
A = 36” Recommended Row Spacing
(Measured with chair in upright position)
AB
24”
119
AV FURNITURE | CUSTOM SEATING