Product Manual

P a g e | 14
20-62 VHF & UHF TRANSMITTER
Product Manual
Sea Air and Land Communications Ltd, 10 Vanadium Place, Addington, Christchurch 8024, New Zealand June 2020
Writing the Configuration
Write Changes
If a field is changed it will be highlighted in yellow.
Any tabs with fields that have changed will also be highlighted in yellow.
Select “Device->Write Changes” from the menu, or Click the “Write changes” icon to write ONLY
the fields highlighted in yellow. This is much quicker than writing everything.
If the configuration has been read from a file, or from another 20-62, any differences from the
configuration in Sacoto and in the configuration of the 20-62 is unknown. If you want to preserve
the settings in the device and only make a few changes you should read from the 20-62 first.
Write All
If you want to duplicate a known configuration read from another 20-62, or restore a previous
configuration saved on disk, then you should select “Device->Write All” from the menu, or click
the “Write all” icon.
Changes can be made to the configuration before writing, but only the changes from the
previously read configuration (from a file or another 20-62) will be highlighted. There may be other
differences between the current 20-62 configuration and the configuration shown in Sacato.
Select “Write all” to ensure that all configuration items read from another source are written to
the connected 20-62.