Product Manual

P a g e | 25
20-62 VHF & UHF TRANSMITTER
Product Manual
Sea Air and Land Communications Ltd, 10 Vanadium Place, Addington, Christchurch 8024, New Zealand June 2020
Configuring a Virtual serial port
➢ Click “Add COM”
➢ Select the new port number to assign to the virtual COM
port
➢ If the 20-62 is a TCP server, you must configure the virtual
COM port as a TCP client.
➢ Enter the IP address and port number of the 20-62
➢ Click OK
➢ Turn on the 20-62 and ensure the Ethernet is connected.
➢ The “Net State” should show “connected” when a connection has been established.
➢ Start your terminal software or other paging application and connect to the COM port
you have just created.