Installation manual

TORQUE
ITEM OPERATION
Release the pressure in the coolant system by locating the pressure
relief cap and slowly turning it 1/2 turn counter-clockwise.
Once pressure is relieved, remove cap.
Find a suitable container below the radiator petcock drain (located
bottom passenger side), and use a 19mm to open the valve and drain
coolant.
NOTICE: If a coolant vacuum machine is available, it can be used
to extract the coolant by hooking the vacuum line to the petcock
and then vacuuming out the coolant reservoir bottle.
Once the coolant is done draining, re-tighten the petcock drain.
ITEM PART NUMBER QTY. DESCRIPTION
TORQUE
NOTES:
PROCESS PAGE
REMOVE ENGINE COOLANT
11
20
30
10
40
30
40
10
20