Installation manual

TORQUE
ITEM OPERATION
Feed the water pump harness along the main harness in the passenger
(RH) wheel well.
Feed the water pump harness between the top of the washer fluid bottle
and bottom of the wheel well along the front edge.
Continue routing the water pump harness over the washer bottle to the
front of the vehicle. It will get plugged into the pump and grounded at a
later step.
Once it has been verified that the water pump harness is positioned
correctly, tuck the harnesses behind the larger main harness. Use 3 zip
ties (A) to fasten the Saleen harness to the existing main harness in the
passenger side (RH) wheel well in the three designated locations.
ITEM PART NUMBER QTY. DESCRIPTION
00-9007-C10122* 3 7" Zip Tie
TORQUE
NOTES:
PROCESS PAGE
ROUTE WATER PUMP HARNESS
40
20
30
10
50
A
20
10
MAIN HARNESS
30
40
ZIP TIE
ZIP TIE
ZIP TIE
WATER PUMP
HARNESS