Installation manual

TORQUE
ITEM OPERATION
Set the front fender well liner into place at the front of the wheel well.
Line up the holes in the liner with the holes in the inner fender. Install 3
of the 7 retainer clips into the front liner to hold it into place.
Set the rear fender liner in place. To do so, feed the bottom of the liner
behind the RH rocker cover. Next, overlap the front liner at the top of
the fender well.
Line up the holes in the liner with the holes in the inner fender. Install 4
of the 7 retainer clips into the rear liner to hold it into place.
NOTICE: The 2 top retainers will be inserted into the rear liner and
pass through the front liner before entering the fender.
ITEM PART NUMBER QTY. DESCRIPTION
TORQUE
NOTES:
PROCESS PAGE
INSTALL RH FRONT FENDER
LINERS
41
20
30
10
50
6 of 7 RETAINERS SHOWN FENDER LINER
RETAINER PIN
10
40
20