Installation manual

TORQUE
ITEM OPERATION
Slide the heat exchanger (A) (with the brackets pointed up) over the 4
factory bolts protruding from the back side of the bumper.
Thread on, and HAND TIGHTEN four jet nuts (B) (1 for each bolt).
Leave the nuts loose to allow play in the heat exchanger. This will make
installing the hose running between the heat exchanger and intercooler
water pump easier to install. The nuts will be tightened during the
intercooler water pump installation Page 53
.
ITEM PART NUMBER QTY. DESCRIPTION
06-2001-C09599
1
Heat Exchanger S/C, Mustang
00-9003-C001370
4
Jetnut M8x1.25
TORQUE
NOTES:
PROCESS PAGE
INSTALL HEAT EXCHANGER
2005 to 2006 VEHICLES
50
20
10
A
THIS SIDE UP, THIS SIDE FORWARD
RH SHOWN
10
10
20
20
B
A