EN 0
Table of Contents EN 1. Introduction........................................................ 2 System Requirement..................................... 3 2. Preparation........................................................ 4 Component & Accessories............................. 4 Part Name...................................................... 5 3. Install.................................................................. 6 Take Out the Action Camera..........................
EN 1. Introduction Welcome to the world of digital imaging. The following information will help you to use your Action Camera HD-160AW to its full capabilities. Before you install and operate the product, please take a few minutes to read through this manual. It provides proper instructions for you to install and operate the product. The electron device may be affected by static electricity interference. Please plug-in / out and wait a few minutes to start this function.
System Requirement EN PC System Requirements Intel® Core2Duo 1.8G or AMD equivalent CPU Hi-speed USB2.0 port 1 GB RAM internal memory minimum 500MB free hard disk space 800 x 600 pixel color monitor nVIDIA GeForce MX440 or above, AMD (ATi) Radeon 9200 or above DirectX 9.0 or higher Windows® XP (SP2 or higher) / Windows Vista™ / Windows 7™, Windows 8™ Note: If your system is Windows XP Service Pack I, please go to www.microsoft.com.
EN 2.
Part Name EN 5
EN 3. Install Take Out the Action Camera 1. Release the latch of the Waterproof Case. 2. Open and push the latch to the end.
3. Release the hook of the latch and open the case cover. EN 4. Dismount the case cover.
5. Take out the Action Camera from the Waterproof Case.
Memory Card Install EN 1. Make sure the Action Camera has powered off. 2. Insert a compatible micro SD card into the memory card slot of the Action Camera. Install the Action Camera 1. Put the Action Camera back in the Waterproof Case.
EN 2. Push the Action Camera to the end of the case. 3. Hook up the case cover and close it then push the latch down and lock the case cover.
4. Force the latch down to the end. EN 5. Make sure the latch has locked and the case cover has closed completely.
EN Base Mount Install 1. Clean the flat surface where you want to fix the Base Mount. 2. Remove the protected membrane of adhesive on the Base Mount. 3. Put and compress the Base Mount on where you want to install and keep it for at least 24 hours to make sure the adhesive has firmly stuck on.
4. Charge EN 1. Open the Waterproof Case and take out the Action Camera. 2. Plug the micro USB cable into the supplied AC Wall Adaptor or a PC / Mac USB 2.0 port.
EN 3. The Status LED at the left side of the Action Camera light on in Green to tell you it’s charging. When the Status LED turns off, the battery is full and charge completely. Note: The Action Camera vibrates 3 times and power off when the battery power is low and need to recharge it.
5. Record EN Car Mode Circulated Recording 1. Slide the Mode Switch down to the Car Mode. 2. The Video Record supports 2 resolutions. Slide the Resolution Switch up for Full HD 1080p and slide down for HD 720p.
EN 3. Press and hold the Power / REC Button for 3 seconds then release to turn on the Action Camera. The Action Camera vibrates 3 times and the Power LED light on in Blue. The Wireless Function active at the same time. 4. The Action Camera vibrates 1 time and start recording automatic. The Record LED light on in Red and The Wireless LED light on in Blue when ready. 5. Press the Power / RED Button then release. The Action Camera vibrates 1 time, stop record, turn off the Record LED and save file.
6. Press and hold the Power / RED Button for 3 seconds then release again. The Action Camera vibrates 3 times, the Power LED turn off and power off. Note: 1. Don’t take out the micro SD card during the video record. 2. The Status LED will flash the RED if no microSD card insert into the microSD card slot and power off after 10 seconds automatic. 3. In Circulate Record Mode, the camera circulate record video and overwrite the oldest recorded file first. 4. The recorded file divides each 3 minutes per file.
EN Sporty Mode 1. Press and hold the Power / REC Button for 3 seconds then release to turn on the Action Camera. The Action Camera vibrates 3 times and the Power LED light on in Blue. 2. Slide the Mode Switch up to the Sporty Mode.
3. The Video Record supports 2 resolutions. Slide the Resolution Switch up for Full HD 1080p and slide down for HD 720p. 4. Press and release the Power / REC Button, the Action Camera vibrates 1 time. The Record LED light on in Red and start recording.
EN 5. Press and release the Power / REC Button again, the Action Camera vibrates 1 time. The Record LED turns off then stops record and saves file. 6. Press and hold the Power / RED Button for 3 seconds then release again. The Action Camera vibrates 3 times, the Power LED turn off and power off. Note: 1. Don’t take out the micro SD card during the video record. 2. The Status LED will flash the RED if no microSD card insert into the microSD card slot and power off after 10 seconds automatic. 3.
6. Wireless EN Wireless function enables user to remotely control the Action Camera via Apps from iOS and Android smartphones and tablets. Wireless On 1. The wireless function actives automatic when the Action Camera power on. 2. The Wireless LED lights on in Blue when wireless function has ready. Note: 1. Before use the Action Camera App to control camera, make sure to connect your camera via WLAN setting in your smartphone or tablet. 2.
EN Control via App 1. Download and install the App SMC (Smart Camera) from App Store for iOS or Google Play for Android. 2. Remotely control the Action Camera via SMC (Smart Camera) from iOS and Android smartphones and tablets. Wireless Off 1. The wireless turns off when the Action Camera power off. 2. Or you can press the Wireless Button to turn on / off wireless function manual.
7. Download EN Download from Camera 1. Connect the supplied mini USB cable into the micro USB port of the Action Camera. 2. Plug the USB cable into a PC / Mac USB 2.0 port. 3. The Status LED at the left side of the Action Camera light on in Green after power on.
EN 4. On a PC / Mac, your Action Camera will mount to your computer as a mass storage device in MSDC mode. 5. You may download your video files from the X:\DCIM\100__DSC folder created on the micro SD card. Note: 1. Always eject the device from PC / Mac. 2. The Action Camera auto power off when disconnect the micro USB cable. Download from Card Reader 1. Make sure the Action Camera has turned off. 2.
8. Playback EN Playback from PC The video file format is MOV which can be played by QuickTimeTM with PC / Mac. Windows 7: The videos can be viewed by the built-in Windows Media Player TM or QuickTime TM. Windows XP: The videos can be viewed by the Windows Media Player TM Ver. 11 or QuickTime TM. Note: For PC version which can be downloaded from: http://www.apple.com/quicktime/download/ Playback from Mac Mac: Use the built-in QuickTime TM.
EN 9. Appendix Specification Sensor 5M (2592x1944) CMOS 1/3.2” DSP AIT 8427 Lens 4G1P, F2.7, f3.16mm, Optical 132° Video Resolution Full HD : 1080p (1920x1080) 30 fps HD : 720p (1280x720) 60 fps Video File Format MOV White Balance Auto Exposure Auto Video Encoder H.264 Audio Encoder AAC and AC3 mono, sample rate 48K Audio Input Built-in MIC Wireless IEEE 802.11 b/g/n standards compliant Water-Resistant IPX8 (Waterproof Case only) Battery Internal Li-Ion Rechargeable Battery 3.
Waterproof Case Maintenance EN Maintenance 1. Inspect O-ring for damage prior to each use. 2. After extended storage, monitor initial use closely to ensure seal in tight. 3. Dry outer housing before opening to avoid damage to the seal. 4. Do not rinse outer housing. If dirty, wipe clean with a soft damp cloth. 5. Keep O-ring clean. Dirt may damage the seal. 6. Do not use sharp objects to remove O-ring. Storage 1. Remove the case cover when store the waterproof case to avoid damage to O-ring. 2.
Federal Communications Commission (FCC) Statement EN 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
EN Trademark Information TM TM TM QuickTime , Mac , and iOS are trademarks of Apple Inc. or its related companies. TM Android is trademark of Google Inc. or its related companies. ® ® ® ® ® Windows , Windows XP , Windows Vista , Windows 7 , Windows 8 , ® ® Windows Media Player are trademarks of Microsoft Corporation or its related companies.
