User Manual

6. Press and hold the Power / RED Button for 3 seconds

then release again. The Action Camera vibrates 3

times, the Power LED turn off and power off.

Note: 1. Don’t take out the micro SD card during the video record.

2. The Status LED will flash the RED if no microSD card

insert into the microSD card slot and power off after 10

seconds automatic.

3. In Circulate Record Mode, the camera circulate record

video and overwrite the oldest recorded file first.

4. The recorded file divides each 3 minutes per file.

5. The file name format is CAR_0001.MOV.

6. Always check the SD card space and make sure the car

has enough space to save new files.

7. The camera auto power on and record when plug-in the

micro USB cable with an external power supply.

8. The camera auto stop record, save file and power off when

the external power off from the micro USB port.

 Accidental Record

The built-in 3-axis G-force Sensor always detects

strong forces from any directions. When a rapidly

variational force (like a collided accident) was be

detected during the video record. The current

recording file will be locked and can’t be overwritten

even the memory card is full.

Note: 1. Base on the situation of the traffic to adjust the sensitivity

of G-force Sensor. If the sensor is too sensitively that

will easy to create a locked file just a slight variation.

(Regarding how to adjust the sensitivity of G-force sensor,

please refer "SMC App".)

2. The file named format is SOS_0001.MOV.

3. Always check the SD card space and make sure the

camera has enough space to save new files.