GEBRUIKSAANWIJZING Lees de gebruiksaanwijzing alvorens de TV te gebruiken en houd hem bij de hand voor latere referentie.
BELANGRIJKE INSTRUCTIES Veiligheidsinformatie OPGELET DE DVD/VIDEO CD/CD SPELER IS EEN KLASSE 1 LASERPRODUCT. DE DVD/VIDEO CD/CD SPELER GEBRUIKT EEN ZICHTBARE LASERSTRAAL DIE GEVAARLIJKE BLOOTSTELLING AAN STRALING KAN VEROORZAKEN. ZORG ERVOOR DE DVD/VIDEO CD/CD SPELER TE GEBRUIKEN ZOALS BESCHREVEN IN DE GEBRUIKSAANWIJZING. KIJK NIET, ALS DE DVD/VIDEO CD/CD SPELER OP HET STROOMNET IS AANGESLOTEN, IN DE OPENING VAN DE DISCLADE OF IN ANDERE OPENINGEN VAN DEZE SPELER.
Het bliksemsymbool in een gelijkbenige driehoek dient om u ervan te verwittigen dat er binnen het toestel gevaarlijke spanningen aanwezig zijn. OPGELET RISICO VAN ELEKTRISCHE SCHOK NIET OPENEN OPGELET: OM HET RISICO OP EEN ELEKTRISCHE SCHOK TE VERMIJDEN MAG HET TOESTEL NIET GEOPEND WORDEN. BINNENIN BEVINDEN ZICH GEEN ONDERDELEN VOOR DE GEBRUIKER. CONSULTEER EEN SERVICEDIENST.
Hou het toestel op een bepaalde afstand van magnetische voorwerpen zoals luidsprekers. LASER VEILIGHEID Dit toestel beschikt over een optisch lasersysteem in een CD-mechanisme dat voorzien is van de nodige veiligheidsvoorzieningen. Probeer het niet uit elkaar te nemen. Blootstelling aan de laserstraal kan oogschade veroorzaken. Dit is een Klasse-1 laserproduct.
Bewaar de disc in zijn doosje als hij niet gebruikt wordt. Als het oppervlak bevuild is Gebruik een zacht en vochtig (alleen water) doekje. Wrijf vanuit het midden naar de rand van de disc zodat er geen vervorming kan ontstaan. (Indien u de disc in een cirkelbeweging reinigt kunnen er cirkelvormige krassen ontstaan die in vervorming resulteren). Als de disc uit een koude in een warme ruimte gebracht wordt, kan er zich condens op de disc vormen.
INHOUD BEGINNEN BELANGRIJKE INSTRUCTIES.....................................................................................1-4 ACCESSOIRES ............................................................................................................…4 EIGENSCHAPPEN .......................................................................................................…6 ALGEMENE ONDERDELEN....................................................................................... …7-8 AFSTANDSBEDIENING............
EIGENSCHAPPEN 21.5” TFT SCHERM Dit toestel beschikt over een 21.5” TFT scherm om heldere beelden weer te geven.
ALGEMENE ONDERDELEN HOOFDEENHEID 1. TFT scherm 2. Infrarood ontvanger / Power indicator: in stand-by licht deze rood op, wanneer het toestel ingeschakeld wordt deze indicator blauw 3. Voetbevestiging 4. VOL +/- toets: om het volume te verhogen of te verlagen of om naar links/rechts te gaan 5. CH +/- toets: om vorige of volgende zender te kiezen of om naar boven/onder te gaan 6. MENU: om in het menu te gaan 7. TV/AV: om de ingangsbron te kiezen 8.
ALGEMENE ONDERDELEN HOOFDEENHEID 1. Stroomtoevoer 2. CVBS en AUDIO L/R ingangen 3. HDMI ingang 4. SCART ingang 5. PC AUDIO ingang 6. VGA ingang 7. CVBS en AUDIO L/R uitgangen, alleen voor DVD modus 8. USB1 aansluiting voor multimediaweergave in TV modus 9. Aansluiting hoofdtelefoon 10. RF-ingang: aansluiting antenne 11. Y Pb Pr ingang 12. Disclade: gleuf om een disc in te brengen 13.
AFSTANDSBEDIENING 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. AAN/UIT: Het apparaat op stand-by modus schakelen; nogmaals indrukken om in te schakelen. AUTO: Het scherm automatisch afstellen (PC/VGA); : De diskhouder openen of sluiten (DVD). RODE toets (TV) PROG: Programmeermenu openen (DVD). GROENE toets (TV) INTRO: Huidig afspelende CD scannen.
AFSTANDSBEDIENING 16. : Het afspelen starten of pauzeren. 17. : Vooruitspoelen. 18. : Terugspoelen. 19. MEDIA: Druk meerdere keren op deze toets om het toestel te wisselen tussen DISK, USB en KAART in DVD modus. 20. █ : Het afspelen stoppen. 21. : Volgende hoofdstuk afspelen. 22. : Vorige hoofdstuk afspelen. 23. MENU: Het hoofdmenu openen, nogmaals indrukken om terug te keren naar de vorige menupagina. 24. NICAM: Van soundtrack wisselen. AUDIO: Van soundtrack wisselen (DVD). 25. OK: Selecties bevestigen.
VOORBEREIDING AFSTANDSBEDIENING PLAATSEN VAN DE BATTERIJEN Plaats de batterijen zoals getoond in onderstaande illustratie en zorg ervoor dat de + – geplaatst worden zoals aangeduid in het batterijencompartiment (fig. 1) en LEVENSDUUR VAN DE BATTERIJEN De batterijen gaan gewoonlijk een jaar mee, maar dit hangt af van hoeveel de afstandsbediening gebruikt wordt. Als de afstandsbediening niet goed werkt, zelfs dicht bij het toestel, dan moeten de batterijen vervangen worden. Gebruik twee AAA batterijen.
BASIS AANSLUITINGEN Zorg ervoor dat er geen kabels zijn aangesloten alvorens het toestel op netstroom aan te sluiten. Lees de instructies alvorens andere toestellen aan te sluiten. AANSLUITEN VAN DE NETSTROOM Hoofdtoestel Stopcontact AC Adapter AANSLUITEN VAN EXTERNE ANTENNE Sluit een externe antenne aan om te genieten van de beste beeldkwaliteit.
COMPOSIET AV (CVBS) AANLSUITING Voor basisaansluiting, gebruik de composiet AV kabel Audio L/R (wit/rood) en CVBS (geel) kabel voor aansluiting van andere toestellen.
HDMI AANSLUITING Sluit de HDMI kabel aan andere HDMI kabel apparaten aan om een high-definition multimedia signaal te ontvangen.
PC/VGA AANSLUITING Gebruik een VGA kabel en Achterkant een audio kabel om op de van PC Audio kabel TV een PC aan te sluiten en de TV als monitor te gebruiken.
AANSLUITING HOOFDTELEFOON Kabel hoofdtelefoon USB AANSLUITING (TV) USB AANSLUITING (DVD) 16
ZORG ERVOOR DAT ALLE TOESTELLEN EN DE AC ADAPTER GOED ZIJN AANGESLOTEN EN HET TOESTEL IN DE CORRECTE MODUS STAAT BASIS BEDIENING - Druk op de POWER toets van de afstandsbediening om het toestel in te schakelen (de indicator wordt blauw); druk opnieuw om het toestel in stand-by te zetten (indicator wordt rood). DVD - Druk op de TV/AV toets van de afstandsbediening om het toestel in DVD modus te zetten. 1. Basis weergave a) Controleer of er reeds een disc in het compartiment is.
4. Snel voorwaarts/achterwaarts Druk tijdens de weergave op of om snel voorwaarts of achterwaarts te zoeken. Druk op (PLAY) om terug tot een normale weergave te gaan. 5. Pauze/weergave Druk tijdens de weergave op om de weergave te pauzeren en druk opnieuw om verder te gaan met normale weergave. 6. Weergave muziek a) Breng een disc in dat muziekdocumenten bevat en na enkele seconden toont het scherm de folders die zich op de disc bevinden.
c) De nummers in de folder worden getoond. Gebruik de navigatietoetsen om een nummer te kiezen en druk op (PLAY) om de weergave te starten, of druk op OK. d) Gebruik de of toetsen om de volgende of vorige menupagina weer te geven. e) Druk op REPEAT van de afstandsbediening om de weergavemodus te kiezen: - SINGLE: weergave van één enkel nummer - REPEAT ONE: herhaling van het nummer - REP DIR: alle nummers in de folder worden herhaald. - FOLDER: alle nummers in de folder worden weergegeven.
Foto’s spiegelen Druk op de navigatietoets naar boven om de foto verticaal te spiegelen. Druk op de navigatietoets naar onderen om de foto horizontaal te spiegelen. Beelden in- en uitzoomen Druk op ZOOM om het beeld te verkleinen of vergroten tot 50%, 75%, 100%, 125%, 150% en 200%. OPMERKING: als het beeld vergroot is kan u de navigatietoetsen gebruiken om het beeld te verschuiven. Dia showeffecten Druk op de PROG toets om de overgangseffecten te kiezen.
e) Gebruik of om naar de volgende of de vorige menupagina te gaan. f) Druk op REPEAT van de afstandsbediening om de weergavemodus te kiezen: - SINGLE: weergave van één enkel nummer - REPEAT ONE: herhaling van het nummer - REP DIR: alle nummers in de folder worden herhaald. - FOLDER: alle nummers in de folder worden weergegeven. OPMERKING: de beschikbare mogelijkheden kunnen variëren van disc tot disc. 11.
13. Programma weergave a) Druk op de PROG toets en het scherm toont het programmeermenu. b) Gebruik de navigatietoetsen om een geheugenindex te kiezen en druk op OK om met het programmeren te beginnen. Breng de gewenste nummers van de titels/hoofdstukken in via de navigatietoetsen. Deze worden in het geheugen opgeslagen. Gebruik om naar de volgende pagina te gaan. Tot 20 nummers kunnen geprogrammeerd worden.
18. Wijzigen van de gesproken taal (DVD/VCD/CD) Het is mogelijk de gesproken taal te wijzigen ten opzichte van de originele instelling. (Dit werkt alleen met discs die meerdere gesproek talen voorzien). - Druk tijdens de weergave op AUDIO om de gewenste en beschikbare taal te kiezen. OPMERKING: als er geen gesproken taal is opgenomen, heeft deze toets geen functie. 19. Initiële instellingen Eens de initiële instellingen ingebracht zijn, blijven deze in het geheugen totdat ze gewijzigd worden.
2. AUDIO Downmix - gebruikt om de audio uitgangsmodus te kiezen. Opties: a) LT/RT - links/rechts gemengd b) STEREO 3. VOORKEUREN 3.1 TV systeem - selecteer het gewenste TV-systeem. 3.2 Audio systeem - selecteer de gewenste gesproken taal bij disc met meerdere talen. 3.3 Ondertitels - selecteer de taal voor ondertitels bij een disc met meerdere talen. 3.4 Disc menu - selecteer de taal van het discmenu, als deze over meerder talen beschikt. 3.
TV - Druk op de TV/AV toets van de afstandsbediening op het toestel in TV modus te zetten DE GEWENSTE ZENDER KIEZEN 1. Druk op CH+ om naar de volgende zender te gaan. 2. Druk op CH- om naar de vorige zender te gaan. 3. Gebruik de numerieke toetsen van de afstandsbediening om het zendernummer direct in te brengen. OPMERKING: druk op -/-- om het nummer van een zender in te brengen die uit meerdere cijfers bestaat. VOLUMEREGELING Gebruik VOL+ of VOL- om het volume te regelen.
INSTELLEN VIDEOFORMAAT Druk op ASPECT om het videoformaat direct in te stellen. Beschikbare mogelijkheden: Auto, 4:3, 16:9, Zoom1, Zoom2, PAL+ OPMERKING: het beschikbare formaat hangt af van de ingangsbron. GELUIDSINSTELLING Druk op NICAM om de gewenste geluidsinstelling te kiezen OPMERKING: afhankelijk van de zender kan deze toets verschillende opties bieden. INFORMATIESCHERM Druk op DISPLAY om informatie over de zender op te roepen, zoals zendernummer, kleursysteem, geluidsysteem, enz.
MEDIA AFSPELEN - Steek de USB geheugenapparaat in de USB1 poort. - Druk op de TV/AV knop op het apparaat of op de afstandsbediening om dit apparaat op Mediamodus te schakelen. - Druk op de VERLATEN knop op de afstandsbediening om terug te keren naar de vorige menupagina. 1. FOTO’S - Druk op de LINKSE of RECHTSE navigatieknop om een FOTO item te selecteren. - Druk op de OK knop om het te openen en druk op de LINKSE of RECHTSE navigatieknop om de gewenste disk te selecteren.
- Druk op de RODE knop om een dialoogvenster te openen en druk op de LINKSE of RECHTSE navigatieknop om het item al dan niet te wissen. - Druk op de OK knop om het gemarkeerde bestand af te spelen. Tijdens normale weergave van FOTO’S: - Druk op de DISPLAY knop op de afstandsbediening om de taakbalk te openen/verbergen. - Druk op de LINKSE/RECHTSE navigatieknop om de gewenste optie te selecteren en druk ter bevestiging op de ENTER knop. - Druk op de knop om het afspelen te pauzeren/starten.
- Druk op de RODE knop om een dialoogvenster te openen en druk op de LINKSE of RECHTSE navigatieknop om het item al dan niet te wissen. - Druk op de OK toets om het gemarkeerde bestand af te spelen. Tijdens normaal afspelen van MUZIEK: - Druk op de LINKSE/RECHTSE navigatieknop om de gewenste optie te selecteren in de taakbalk en druk ter bevestiging op de OK knop. - Druk op de knop om het afspelen te pauzeren/starten. - Druk op de / knop om terug/vooruit te spoelen.
- Druk op de RODE knop om een dialoogvenster te openen en druk op de LINKSE of RECHTSE navigatieknop om het item al dan niet te wissen. - Druk op de OK toets om het gemarkeerde bestand af te spelen. Tijdens normale weergave van FILMS: - Druk op de DISPLAY knop op de afstandsbediening om de taakbalk te openen/verbergen. - Druk op de LINKSE/RECHTSE navigatieknop om de gewenste optie te selecteren in de taakbalk en druk ter bevestiging op de OK knop. - Druk op de knop om het afspelen te pauzeren/starten.
4. TEKST - Druk op de LINKSE of RECHTSE navigatieknop om het TEKST item te selecteren. - Druk op de OK knop om het te openen en druk op de LINKSE of RECHTSE navigatieknop om de gewenste disk te selecteren. - Druk op de OK knop om het te openen en gebruik de navigatieknoppen om de gewenste folder te selecteren. - Druk op de OK knop om het te openen en gebruik de navigatieknoppen om het gewenste Tekstbestand te selecteren.
HOOFDMENU ● Dit toestel beschikt over verschillende instelmenus. Eens de instellingen gedaan blijven deze in het geheugen en zorgen er aldus voor dat het toestel steeds onder dezelfde condities functioneert. ● De instellingen blijven in het geheugen (zelfs als het toestel in stand-by gezet wordt) totdat u ze terug wijzigt. Algemene procedure voor de instellingen - Druk op MENU om in het hoofdmenu te gaan. - Gebruik de LINKSE/RECHTSE navigatietoetsen om een submenu te selecteren.
1.2 Handmatig afstemmen - Gebruik de UP/DOWN navigatietoetsen om dit item aan te duiden en druk op OK om in het menu te gaan. - Gebruik de UP/DOWN navigatietoetsen om de tweede optie te kiezen. - Gebruik de LINKSE/RECHTSE navigatietoetsen om de regeling te beginnen. 1.3 Zenderlijst bewerken - Gebruik de UP/DOWN navigatietoetsen om dit item aan te duiden en druk op OK om in het menu te gaan. - Druk op ROOD om de zender te verwijderen. - Druk op GROEN om in het menu voor naamverandering te komen.
2.1 Beeldmodus Beschikbare opties: gebruiker, dynamisch, standaard, zacht. OPMERKING: de instellingen van contrast, helderheid, kleur, tint en scherpte zijn beschikbaar als ‘gebruiker’ is gekozen. 2.2 Contrast De waarde van het contrast kan ingesteld worden tussen 0-100. 2.3 Helderheid De waarde van de helderheid kan ingesteld worden tussen 0-100. 2.4 Kleur De waarde van de kleur kan ingesteld worden tussen 0-100. 2.5 Tint De waarde van de tint kan ingesteld worden tussen 0-100.
3.1 Geluidmodus Beschikbare opties: standaard, muziek, film, sport, gebruiker. OPMERKING: de instellingen van hoge en lagen tonen is mogelijk als ‘gebruiker’ is gekozen. 3.2 Hoge tonen De waarde van de hoge tonen kan ingesteld worden tussen 0-100. 3.3 Lage tonen De waarde van de lage tonen kan ingesteld worden tussen 0-100. 3.4 Balans Om het uitgangsniveau tussen linker en rechter luidsprekers in te stellen van -50 tot 50. 3.5 Automatisch volume Om het automatisch volume in of uit te schakelen. 4.
5. OPTIES 5.1 OSD taal Om de taal van OSD in te stellen. 5.2 Teletekst taal Om de taal van teletekst in te stellen. 5.3 Beeldverhouding Beschikbare opties: auto, 4:3, 16:9, Zoom1, Zoom2, PAL+ OPMERKING: dit kan volgens het beschikbaar signaal soms niet instelbaar zijn. 5.4 Blauw scherm Om de blauwe achtergrond in of uit te schakelen. Het scherm wordt blauw in geval van geen of een zeer zwak signaal, als deze functie ingeschakeld is. 5.
PC MODUS - Schakel de computer en de TV in. - Sluit de computer aan via een VGA kabel. - Druk op de TV/AV toets om PC modus te selecteren. - Druk op MENU om in het hoofdmenu te komen en gebruik de LINKSE/RECHTSE navigatietoetsen om SCHERM aan te duiden. - Gebruik UP/DOWN navigatietoetsen om de gewenste optie te kiezen en druk op OK om in het submenu te gaan. - Gebruik de LINKSE/RECHTSE navigatietoetsen om de waarde in te stellen. Automatische instelling Om het scherm automatisch in te stellen.
ONDERHOUD ● Schakel het toestel in stand-by en trek de stekker uit het stopcontact alvorens het toestel te onderhouden. ● Reinig met een droog en zacht doekje. ● Als de behuizing erg vuil is, gebruik een doekje dat ondergedompeld is in een water/zeep solutie en voldoende is uitgewrongen. Gebruik daarna opnieuw een droog doekje. ● Gebruik nooit alcohol, benzine, thinner, een reinigingsmiddel of andere chemicaliën. Gebruik ook geen spuitbus op stof te verwijderen.
INSTALLATIE VAN DE VOET Bij uw toestel wordt een aparte voet meegeleverd. Gelieve de volgende instructies te volgen voor het monteren van de voet alvorens de TV in gebruik te nemen. Stap 1 Plaats de TV met het beeld omlaag op een zachte doek of een kussen om paneelbeschadiging te voorkomen. Stap 2 Stem de Steun af op de onderkant van de TV. Stap 3 Draai de meegeleverde schroeven vast met een schroevendraaier.
SPECIFICATIES Scherm Resoutie Pixelgrootte 21.5 inch LED TV 1920×1080 Luminantie Contrastverhouding Beeldschermverhouding Reactietijd Kijkhoek Zichtbaar bereik 200 cd/m2 1000:1 16:9 14 ms 178(H)/178(V) Levensduur 30,000 uur MULTIMEDIA WEERGAVE FORMATEN (TV MODUS) USB1 Film: AVI, MP4, TS, MPG, MKV/MOV, DAT, VOB, RM/RMVB Muziek: MP3, AAC Foto: JPG/JPEG, BMP, PNG Tekst: TXT MULTIMEDIA WEERGAVE FORMATEN (DVD MODUS) USB2 0.24825(H)×0.24825(V)mm 476.64(H)×268.
IN GEVAL VAN PROBLEMEN Gebruik onderstaande lijst voor het oplossen van mogelijke problemen. Probleem (ALGEMEEN) Geen voeding Geen beeld Geen geluid Vervormd geluid Er kunnen geen functies met de afstandsbediening uitgevoerd worden Geen enkele toetsbediening (op het toestel of afstandbediening) heeft effect Probleem (TV) Geen of slecht beeld Geen of slecht geluid Ruis of andere storing OPLOSSING Stop de stekker stevig in het stopcontact. Controleer of alles goed is aangesloten.
IN GEVAL VAN PROBLEMEN Probleem (DVD) Weergave start niet, zelfs niet na selectie van de titel De initieel ingestelde talen voor audio en ondertitels zijn niet bruikbaar Geen ondertitels Andere gesproken talen of talen voor ondertitels kunnen niet geselecteerd worden De hoek kan niet gewijzigd worden Paswoord voor instellen van de ouderlijke controle vergeten Probleem (Video CD) Geen menu weergave Probleem (USB) Toestel herkent mijn USB-sleutel of externe harde schijf niet wanneer aangesloten op de USB inga
INSTRUCTION MANUAL Read all of the instructions before using this TV and keep the instruction manual in a safe place for future reference.
IMPORTANT INSTRUCTIONS Safety information CAUTION: DVD/VIDEO CD/CD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER THIS DVD/VIDEO CD/CD PLAYER USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD/VIDEO CD/CD PLAYER CORRECTLY AS INSTRUCTED. WHEN THIS DVD/VIDEO CD/CD PLAYER IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS PLAYER.
Read all instructions before using Do not use this product near water. Install the product in accordance with the operating instructions. Do not set the product near heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit the product.
DISC Handling and Maintenance Handling precautions Hold the disc by the edges so the surface will not be soiled with fingerprints. Fingerprints, dirt and scratches can cause skipping and distortion. Do not write on the label side with a ball-point pen or other writing utensils. Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids. Be careful not to drop or bend the disc. Do not install more than 1 disc on the disc compartment.
TABLE OF CONTENTS GETTING STARTED IMPORTANT INSTRUCTIONS...................................................................................1-3 ACCESSORIES.............................................................................................................3 FEATURES....................................................................................................................5 GENERAL PARTS......................................................................................................
FEATURES 21.5" TFT DISPLAY This player has a built-in 21.5” TFT display window to provide clear vision and low radiation.
GENERAL PARTS MAIN UNIT 1. TFT display screen 2. Remote control sensor \ Power indicator- In standby mode the indicator light will display red color; when switching on the unit the indicator light will display blue color. 3. Stand holder 4. VOL +/- button- To increase/decrease the volume level or move left/right. 5. CH +/- button- To select next/previous channel or move up/down. 6. MENU button- To enter menu setting page. 7. TV/AV button- To select the input source. - To play or pause playing. 8. 9.
GENERAL PARTS MAIN UNIT 1. Power input 2. CVBS and AUDIO L/R input terminals 3. HDMI input terminal 4. SCART input terminal 5. PC AUDIO input terminal 6. VGA input terminal 7. CVS and AUDIO L/R output terminals (DVD mode only) 8. USB1 slot - For multimedia playback in TV mode. 9. EARPHONE output terminal 10. RF input jack – To connect the antenna. 11. Y / Pb / Pr input terminals 12. Disc slot-To insert a disc according to the silk screen on the side of this slot. 13.
REMOTE CONTROL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. POWER: To set the unit in standby mode; press it again to switch it on. AUTO: To adjust the screen automatically (PC/VGA); : To open or close the disc compartment (DVD). RED button (TV) PROG: To enter program menu page (DVD). GREEN button (TV) INTRO: To scan current played CD. BLUE button (TV) A-B: To repeat playing between two specific points (DVD).
REMOTE CONTROL 16. : To play or pause playing. 17. : To move fast forward. 18. : To move fast backward. 19. MEDIA: Switch this unit among DISC/USB/CARD playback (DVD). 20. █ : To stop playing. 21. : To play next chapter. 22. : To play previous chapter. 23. MENU: To display the main menu. Press it again to return to previous menu page. 24. NICAM: To switch the soundtrack (TV). AUDIO: To select different soundtrack (DVD). 25. OK: To confirm selection. 26. ▲/▼/◄/►: Navigation buttons 27.
REMOTE CONTROL PREPARATION BATTERY INSTALLATION Install the batteries as the following pictures. Be sure + and – terminals are positioned as indicated in the battery compartment (Fig1). SERVICE LIFE OF BATTERIES - The batteries normally last for one year although this depends on how often the remote control is used. - If the remote control fails to work even when it is operated near the player, replace the batteries. - Use two size AAA dry batteries.
BASIC CONNECTION ● Ensure all the cables are disconnected from the main unit before connecting to AC power source. ● Read through the instructions before connecting other equipments. CONNECTING TO AC POWER SOURCE Main unit To power outlet AC Adaptor CONNECT EXTERNAL ANTENNA TO UNIT Install external antenna into antenna jack for best picture.
COMPOSITE AV (CVBS) CONNECTION AV cable For basic connection, use the composite Audio L/R (white/red) and CVBS (yellow) cable to connect the unit with other devices.
HDMI CONNECTION Use HDMI cable to connect HDMI cable the unit with other devices to receive high-definition multimedia signal.
PC/VGA CONNECTION Use VGA cable and Audio cable to connect the unit with Audio cable Back of PC TV or PC, and use this product VGA cable as a monitor.
CONNECT EARPHONE TO THE UNIT EARPHONE cable USB CONNECTION (TV) USB CONNECTION (DVD) 15
MAKE SURE ALL THE EQUIPMENTS AND AC ADAPTOR ARE CONNECTED PROPERLY AND THE UNIT IS SET IN CORRECT MODE BEFORE KINDS OF OPERATIONS. BASIC OPERATIONS - Press POWER button on the unit or remote control to power ON the unit (indicator will glow blue); press it again to power OFF (standby mode) the unit (indicator will glow red). DVD - Press TV/AV button on the unit or remote control to switch this unit to DVD mode. 1. Basic play a) Make sure the disc compartment has no disc.
4. Fast forward/Fast backward During playback, press button or button to fast forward/backward. Press (PLAY) button to resume normal play. 5. Pause/play During playback, press button to pause playing, press it again to resume normal playback. 6. Music playback a) Insert the disc which contains music files and after a few seconds, the screen will show all the folders on the disc. b) Select the folder you want to play by the navigation buttons and press the OK button to confirm.
d) During normal playing, press or button, the player will play the next or previous file. e) Press REPEAT button to change play mode. - SINGLE: play one file only. - REPEAT ONE: repeat one file. - REP DIR: all the files in the folder will be played repeatedly. - FOLDER: all the files in the folder will be played. NOTE: The available repeat modes may vary for different disc. f) Press D.MENU button to return to play list page. 8.
Picture Shrink/Zoom Press ZOOM button repeatedly to enlarge or shrink picture to 50%, 75%, 100%, 125%, 150% and 200%. NOTE: If the picture is enlarged, you may press navigation buttons to pan across other portions of the picture. Slideshow effects Press PROG button on remote control repeatedly to select desired effects.
e) In file selecting page, press or button to turn the current menu page to the next or previous menu page. f) Press REPEAT button to change play mode. - SINGLE: play one file only. - REPEAT ONE: repeat one file. - REP DIR: all the files in the folder will be played repeatedly. - FOLDER: all the files in the folder will be played. NOTE: The available repeat modes may vary for different device. 11.
13. Program play a) Press PROG button and the screen will display the program menu. b) Press navigation buttons to choose memory index and then press OK button to start input. Enter desired titles/chapters numbers by using the numeric buttons. The selected titles/ chapters are stored into the memory. Select on the menu to see the next page. Up to 20 memories can be stored.
18. Changing audio soundtrack language (DVD/VCD/CD disc) It is possible to change the audio soundtrack language to a different language from the one selected at the initial settings (This operation works only with discs on which multiple audio soundtrack languages are recorded). - When playing a disc, press AUDIO button to select desired and available soundtrack or soundtrack language. NOTE: When no soundtrack or soundtrack languages are recorded, pressing this button will not work. 19.
2. AUDIO Downmix - It is used to select desired audio output mode. Options: a) LT/RT-Left/Right mix mode b) STEREO 3. PREFERENCE 3.1 TV System - Select desired TV system. 3.2 Audio - Select desired audio language, if your disc contains multiple audio languages. 3.3 Subtitle - Select desired subtitle language, if your disc contains multiple subtitle languages. 3.4 Disc Menu - Select desired language of your disc menu, if your disc menu contains multiple MENU languages. 3.
TV - Press TV/AV button on the unit or remote control to set the unit in TV mode. SELECT DESIRED PROGRAM 1. Press CH+ button to play next channel. 2. Press CH- button to play previous channel. 3. Press number buttons on remote control directly to select desired program. NOTE: Press -/-- button repeatedly to switch the digit when selecting multiple digit channels. VOLUME CONTROL - Press VOL+ or VOL- to adjust the level of current volume. Available range: 0-100.
SOUND SETTING - Press NICAM button on remote control repeatedly to select desired soundtrack. NOTE: In different channels, pressing NICAM button may have different options. INFORMATION DISPLAY - Press DISPLAY button on remote control to display related information of your channel, including channel number, color system, sound system and so on. TELETEXT When displaying available teletext: - Press TEXT button on remote control to display the teletext.
MEDIA PLAYBACK - Insert a USB memory device into USB1 slot. - Press TV/AV button on the unit or remote control to switch this unit to Media mode. - Press EXIT button on remote control to return to previous menu page. 1. PHOTO - Press LEFT or RIGHT navigation button to select PHOTO item. - Press OK button to enter it and press LEFT or RIGHT navigation button to select desired disk. - Press OK button to enter it and press navigation buttons to select desired folder.
- Press RED button to enter a dialog box, and press LEFT or RIGHT navigation button to decide whether delete it or not. - Press OK button to play highlighted file. During PHOTO normal playing: - Press DISPLAY button on remote control to display/hide the tool bar. - Press LEFT/RIGHT navigation buttons to select desired option and press OK button to confirm it. - Press button to pause/start playing. - Press / button to play previous/next file. - Press █ button to stop playing. 2.
- Press RED button to enter a dialog box, and press LEFT or RIGHT navigation button to decide whether delete it or not. - Press OK button to play highlighted file. During MUSIC normal playing: - Press LEFT or RIGHT navigation button to select desired option in the tool bar, and press OK button to confirm selection. - Press button to pause/start playing. - Press / button to play fast backward / fast forward. / button to play previous/next file. - Press - Press █ button to stop playing. 3.
- Press RED button to enter a dialog box, and press LEFT or RIGHT navigation button to decide whether delete it or not. - Press OK button to play highlighted file. During MOVIE normal playing: - Press DISPLAY button on remote control to display/hide the tool bar. - Press LEFT or RIGHT navigation button to select desired option in the tool bar, and press OK button to confirm selection. - Press button to pause/start playing. - Press / button to play fast backward / fast forward.
4. TEXT - Press LEFT or RIGHT navigation button to select TEXT item. - Press OK button to enter it and press LEFT or RIGHT navigation button to select desired disk. - Press OK button to enter it and press navigation buttons to select desired folder. - Press OK button to enter it and press navigation buttons to select desired Text file. - Press RED button to enter a dialog box, and press LEFT or RIGHT navigation button to decide whether delete it or not. - Press OK button to play highlighted file.
MAIN MENU ● The unit contains different setting menus. Once the initial programming is entered, it will be remained in the memory until change, and the unit can always be operated under the same conditions. ● The settings will be remained in the memory until the settings are changed ever after setting the player to standby mode. Common procedure for initial settings - Press MENU button on remote control to display the main menu. - Press LEFT/RIGHT navigation button to select submenus.
1.2 ATV Manual Tuning - Press UP or DOWN navigation button to select this item, and press OK button to enter it. - Press UP or DOWN navigation button to select the second option. - Press LEFT or RIGHT navigation button to adjust it. 1.3 Programme Edit - Press UP or DOWN navigation button to select this item, and press OK button to enter it. - Press RED button to delete highlighted channel. - Press GREEN button to enter Rename mode.
2.1 Picture Mode Available options: User, Dynamic, Standard, Mild. NOTE: The value of Contrast, Brightness, Colour, Tint and Sharpness is adjustable only when Picture Mode is User. 2.2 Contrast The value of contrast can be adjusted from 0-100. 2.3 Brightness The value of brightness can be adjusted from 0-100. 2.4 Color The value of color saturation can be adjusted from 0-100. 2.5 Tint The value of tint can be adjusted from 0-100. NOTE: This item is available only in NTSC system. 2.
3.1 Sound Mode Available options: Standard, Music, Movie, Sports, User. NOTE: The value of Treble and Brass is adjustable only when Sound Mode is User. 3.2 Treble This item is used to adjust the level of higher-pitched sounds from 0-100. 3.3 Bass This item is used to adjust the level of lower-pitched sounds from 0-100. 3.4 Balance This item is used to adjust the audio output between left and right speakers from -50 to 50. 3.5 Auto Volume This item is used to turn on/off Auto Volume function. 4.
5. OPTION 5.1 OSD Language This item is used to select desired On Screen Display language. 5.2 TT Language This item is used to select desired TT language. 5.3 Aspect Ratio Available options: Auto, 4:3, 16:9, Zoom1, Zoom2, PAL+. NOTE: Aspect Ratio may not be adjustable if no available signals are present. 5.4 Blue Screen This item is used to set the blue background ON or OFF. The screen background will turn blue at very weak or no signal condition, if BLUE SCREEN is ON. 5.
PC MODE - Power on your computer and this TV. - Connect your computer to this TV using a VGA cable. - Press TV/AV button on the unit or remote control to switch this unit to PC mode. - Press MENU button to display the main menu and press LEFT or RIGHT navigation button to select SCREEN. - Press UP or DOWN navigation button to select desired option and press OK button to enter submenu. - Press LEFT or RIGHT navigation button to adjust the value.
MAINTENANCE ● Be sure to press POWER button to set the player to the standby mode and disconnect the AC adaptor before maintaining the player. ● Wipe the player with a dry, soft cloth. ● If the surface is extremely dirty, wipe clean with a cloth which has been dipped in a weak soap-water solution and wrung out thoroughly, and then wipe again with a dry cloth. ● Never use alcohol, benzene, thinner, cleaning fluid or other chemicals. And do not use compressed air to remove dust.
STAND INSTALLATION Your TV is packaged with the Stand and the Cabinet separated. Before enjoying this TV, please carry out the Stand Installation according to the instructions below. Step 1 Place the TV faced down on a soft cloth or cushion to prevent the panel from being damaged. Step 2 Align the Stand with TV bottom. Step 3 Tighten the included screws with a screw driver. NOTES: - Unplug the power plug first when installing or removing the TV Stand.
SPECIFICATIONS Display Device Resolution 21.5 inch LED TV 1920×1080 Pixel Pitch 0.24825(H)×0.24825(V)mm Luminance Contrast Ratio Aspect Ratio Response Time Viewing Angle 200 cd/m2 1000:1 16:9 14 ms 178(H)/178(V) Visible Range 476.64(H)×268.
GENERAL TROUBLESHOOTING Check the following points before assuming malfunctions of this unit: Symptom[COMMON] No power. No picture. ● No sound. ● Distorted sound. No operations can be performed with the remote control unit. No key operation (by the main unit and/or the remote control unit) is effective. Symptom[TV] No or poor picture. No sound or poor sound. Noise or other interface. Symptom [DVD] Play does not start even when title is selected.
GENERAL TROUBLESHOOTING Alternative audio soundtrack (or subtitle) languages fail to be selected. Angle cannot be changed. The password for rating level has been forgotten. Symptom [Video CD] No menu play. Symptom [USB] My player does not recognize my USB key or my external hard disk when plugged to the DVD player's USB slot. ● An alternative language is not selected with discs which do not contain more than one language.
MANUEL D’INSTRUCTION Lisez le manuel d’utilisation avant d’utiliser le TV et gardez-le pour consultation ultérieure.
INSTRUCTION IMPORTANTES Information de sécurité ATTENTION LE LECTEUR DVD/VIDEO CD/CD EST UN PRODUIT LASER CLASSE 1. LE LECTEUR DVD/VIDEO CD/CD UTILISE UN RAYON LASER VISIBLE QUI POURRAIT CAUSER UNE RADIATION DANGEREUSE. UTILISEZ LE LECTEUR DVD/VIDEO CD/CD COMME INDIQUE DANS LES INSTRUCTIONS QUAND LE LECTEUR DVD/VIDEO CD/CD EST CONNECTE AU COURANT SECTEUR NE REGARDEZ PAS DANS L’OUVERTURE DU COMPRATIMENT DISQUE OU DANS LES AUTRES OUVERTURES DU LECTEUR.
L’isez toutes les instructions avant utilisation Ne pas utiliser l’appareil à côté d’eau. Installez l’appareil en suivant les instructions. Ne placez pas l’appareil à côté des sources de chaleurs telles que radiateurs, poêle, ou autres appareils (y compris amplificateurs) qui produisent de la chaleur. Evitez qu’on puisse marcher sur le câble courant secteur. Quand l’appareil est connecté au courant secteur il est prêt à fonctionner.
Traitement et entretien des discs Traitement Tenez le disc avec le bord pour ne pas pour ne pas mettre des empreintes sur la surface. Les empreintes et des griffes peuvent causer une distorsion. N’écrivez pas avec un stylo ou autre instrument sur la face label. N’utilisez pas des aérosols de nettoyage, essence, thinner ou produits antistatitques. Ne pas laisser tomber ou plier le disque. Ne pas mettre plus qu’un disc dans le compartiment.
SOMMAIRE COMMENCER INSTRUCTIONS IMPORTANTES..............................................................................1-3 ACCESSORIES.............................................................................................................3 CARACTERISTIQUES..................................................................................................5 COMMANDES ET CONNEXIONS APPAREIL……....................................................6-7 TELECOMMANDE…..............................................
CARACTERISTIQUES ECRAN 21.5’’ TFT Cet appareil possède un écran 21.5’’ TFT pour offrir des images claires avec radiation minimale.
COMPOSANTS UNITE PRINCIPALE 1. Ecran TFT 2. Récepteur infrarouges / Indicateur puissance – en mode standby l’indicateur s’allume en rouge; quand l’appareil est en fonction l’indicateur devient bleu 3. Pied 4. VOL+/- Pour augmenter ou diminuer le volume ou pour bouger gauche/droite 5. CH+/- Pour sélectionner l’émetteur suivant ou précédent ou pour bouger en haut/en bas 6. MENU – pour entrer dans le menu 7. Bouton TV/AV – sélection d’entrée - Lecture/pause 8. - Pour insérer/éjecter disc 9. 10.
COMPOSANTS UNITE PRINCIPALE 1. Connexion alimentation 2. Entrées CVBS et AUDIO L/R 3. Entrée HDMI 4. Entrée SCART 5. Entrée Audio PC 6. Entrée VGA 7. Sorties CVBS et AUDIO L/R uniquement en mode DVD 8. Connexion USB1 pour lecture multimédia (TV) 9. Sortie casque d’écoute 10. Entrée RF – antenne 11. Entrée Y Pb Pr 12. Compartiment disc 13.
TÉLÉCOMMANDE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. MARCHE/ARRET: Pour mettre l'unité en veille ou en marche. AUTO: Pour ajuster l'écran automatiquement (en mode PC/VGA); : Pour ouvrir et fermer le compartiment de disque. Bouton ROUGE (TV) PROG : Pour entrer dans le menu de programmation (DVD) Bouton VERT (TV) INTRO : Pour effectuer une recherche sur le CD en cours. Bouton BLEU (TV) A-B: Pour effectuer une répétition entre deux points spécifiques (DVD).
TÉLÉCOMMANDE 16. : Pour mettre en pause ou lire. 17. : Pour avance rapide. : Pour retour rapide. 18. 19. MÉDIA : Appuyez sur ce bouton pour basculer entre les modes DISQUE, USB et CARTE en mode DVD. 20. █ : Pour arrêter la lecture. 21. : Pour aller au chapitre suivant. : Pour aller au chapitre précédent. 22. 23. Menu : Pour afficher l'écran principal. Appuyez dessus de nouveau pour revenir à la page précédente. 24.
PREPARATION DE LA TELECOMMANDE INSTALLATION DES PILES Insérez les piles comme montré dans les illustrations suivantes. position + et – comme indiqué dans le compartiment à piles (Fig1). Faites attention à la DUREE DE VIE DES PILES - Normalement les piles ont une durée de vie d’un an, mais ceci dépend du nombre de fois que la télécommande est utilisée. - Quand la télécommande ne fonctionne pas bien, même tout près de l’appareil, il faut remplacer les piles. - Utilisez deux piles AAA.
CONNEXIONS DE BASE ● Faites attention que tous les câbles sont déconnectés de l’appareil avant de brancher le courant secteur. ● Lisez les instructions avant de connecter les autres appareils. CONNEXION COURANT SECTEUR Appareil Prise courant secteur Adaptateur AC CONNEXION ANTENNE EXTERIEURE Connectez l’antenne extérieur pour obtenir une réception optimale.
CONNEXION COMPOSITE AV (CVBS) Câble AV Pour connexion de base, utilisez le câble composite Audio L/R (blanc/rouge) et CVBS (jaune) pour connexion avec d’autres appareils.
CONNEXION HDMI Utilisez un câble HDMI pour connecter d’autres appareils et pour recevoir des signaux multimédia en haute définition.
CONNECXION PC/VGA Utilisez un câble VGA et audio pour connecter le PC et utiliser Câble audio Dos du PC l’appareil comme moniteur.
CONNEXION CASQUE D’ECOUTE Câble du casque d’écoute CONNEXION USB (TV) CONNEXION USB (DVD) 15
ASSUREZ-VOUS QUE TOUS LES APPAREILS ET L’ADAPTATEUR COURANT SECTEUR SONT BIEN CONNECTES ET QUE L’APPAREIL EST MIS EN MODE CORRECT AVANT DE COMMENCER LES OPERATIONS OPERATIONS DE BASE - Pousez le bouton POWER sur la télécommande pour mettre l’appareil en fonction (l’indicateur devient bleu); repoussez ce bouton pour mettre l’appareil en mode standby (l’indicateur devient rouge) DVD - Poussez le bouton TV/AV sur la télécommande pour mettre l’appareil en mode DVD. 1.
4. Avancement rapide en avant/en arrière Pendant la lecture poussez ou pour un avancement rapide en avant ou en arrière. Poussez II pour revenir à la lecture normale. 5. Pause/lecture Pendant la lecture poussez II pour pauser la lecture ; repoussez pour continuer la lecture. 6. Reproduction musique a) Insérez le disque contenant des documents musicaux et après quelques secondes l’écran affiche tous les folders sur l’écran.
d) Pendant la lecture, utilisez ou pour aller vers le numéro suivant ou précédant. e) Poussez le bouton REPEAT sur la télécommande pour choisir entre : - SINGLE : lecture d’un numéro - REPEAT ONE : répétition d’un numéro - REP DIR : tous les documents dans le folder sont répétés - FOLDER : tous les documents dans le folder sont reproduits REMARQUE : les possibilités de répétition dépendent du disc. f) Poussez D.MENU pour retourner à la liste de lecture. 8.
Agrandir/diminuer les photos Poussez le bouton ZOOM plusieurs fois pour diminuer/agrandir la photo à 50%, 75%, 100%, 125%, 150% et 200%. REMARQUE : quand la photo est agrandie, vous pouvez utiliser les boutons de navigation pour bouger la photo. Effets de présentation dia Poussez plusieurs fois le bouton PROG pour sélectionner les modes de transition entre les photos.
e) Dans les pages de sélection, utilisez ou pour aller vers la page suivante ou la pae précédante. f) Poussez le bouton REPEAT sur la télécommande pour choisir entre : - SINGLE : lecture d’un numéro - REPEAT ONE : répétition d’un numéro - REP DIR : tous les documents dans le folder sont répétés - FOLDER : tous les documents dans le folder sont reproduits REMARQUE : les possibilités de répétition dépendent de la source USB. 11.
13. Lecture programmée a) Poussez PROG et l’écran affiche le menu suivant. b) Utilisez les boutons de navigation pour choisir l’index de mémoire et poussez OK pour démarrer la programmation. Entrez les numéros des titres/chapitres voulus avec les boutons numériques. Cesn numéros sont mémorisés. Utilisez sur le menu pour voir la page suivante. Vous pouvez mémoriser jusqu’à 20 numéros.
18. Changer la langue parlée (DVD/VCD/CD) Il est possible de changer la langue parlée initiellement mémorisé. (Ceci ne fonctionne qu’avec des discs avec plusieurs langues pour sous-titres). - Pendant la lecture poussez AUDIO pour choisir entre les langues disponibles REMARQUE : quand le disc ne contient pas de langues ce bouton n’a pas de fonction. 19. Réglages initielles Une fois les réglages faits, ils restent en mémoire jusqu’au moment où vous les changez.
2. AUDIO Downmix - pour sélectionner le mode sortie audio. Options : a) LT/RT : mixage gauche/droite b) STEREO 3. PREFERENCE 3.1 Système TV - pour sélectionner le système TV 3.2 Audio - pour sélectionner la langue parlée, si le disque contient plusieurs langues. 3.3 Sous-titrer – pour sélectionner la langue des sous-titres, si le disque contient plusieurs langues. 3.4 Menu disc – pour sélectionner la langue pour le menu disc, si le disque contient plusieurs langues 3.
TV - Poussez le bouton TV/AV sur la télécommande pour choisir le mode TV. SELECTION DE L’EMETTEUR 1. Poussez CH+ pour aller vers l’émetteur suivant 2. Poussez CH- pour aller vers l’émetteur précédant 3. Utilisez les boutons nuémriques pour choisir directement le numéro de l’émetteur. REMARQUE : utilisez -/-- quand le numéro comprend plusieurs chiffres CONTRÔLE VOLUME Poussez VOL+ ou VOL- pour régler le volume. Réglage entre 0-100 MUTE Poussez MUTE pour couper le son ; repoussez pour reproduire le son.
REGLAGES SON Poussez NICAM pour sélectionner le réglage son.
LECTURE MÉDIA - Insérez un périphérique de stockage USB dans la prise USB1 au préalable. - Appuyez sur TV/AV sur le dessus de l'unité ou sur la télécommande pour basculer en mode MÉDIA. - Appuyez sur QUITTER sur la télécommande pour retourner à la page de menu précédente. 1. PHOTOS - Appuyez sur Gauche ou Droite pour sélectionner PHOTO. - Appuyez sur OK pour confirmer puis appuyez sur GAUCHE ou DROITE pour sélectionner le disque.
- Appuyez sur ROUGE pour afficher une boîte de dialogue, puis utilisez les touches Gauche ou Droite pour confirmer ou non la suppression. - Appuyez sur OK pour visualiser la sélection. En cours de visualisation normale de PHOTO : - Appuyez sur le bouton DISPLAY sur la télécommande pour afficher ou masquer la barre d'outils. - Appuyez sur GAUCHE ou DROITE pour sélectionner option puis sur OK pour confirmer. - Appuyez sur mettre en pause/lancer la lecture.
- Appuyez sur ROUGE pour afficher une boîte de dialogue, puis utilisez les touches GAUCHE ou DROITE pour confirmer ou non la suppression. - Appuyez sur OK pour visualiser la sélection. En cours d'écoute normale de MUSIQUE : - Appuyez sur GAUCHE ou DROITE pour sélectionner l'option de la barre d'outils puis sur OK pour confirmer. - Appuyez sur mettre en pause/lancer la lecture. - Appuyez sur / pour avance ou retour rapide. / pour lire le fichier précédent ou suivant.
- Appuyez sur ROUGE pour afficher une boîte de dialogue, puis utilisez les touches GAUCHE ou DROITE pour confirmer ou non la suppression. - Appuyez sur OK pour visualiser la sélection. En cours de visualisation normale de FILM : - Appuyez sur le bouton DISPLAY sur la télécommande pour afficher ou masquer la barre d'outils. - Appuyez sur GAUCHE ou DROITE pour sélectionner l'option de la barre d'outils puis sur OK pour confirmer. - Appuyez sur mettre en pause/lancer la lecture.
4. TEXTE - Appuyez sur GAUCHE ou DROITE pour sélectionner TEXTE. - Appuyez sur OK pour confirmer puis appuyez sur GAUCHE ou DROITE pour sélectionner le disque. - Appuyez sur OK pour confirmer puis appuyez sur les touches de navigation pour sélectionner le dossier. - Appuyez sur OK pour confirmer puis appuyez sur les touches de navigation pour sélectionner le fichier texte.
MENU PRINCIPAL ● L’appareil contient différents menus de réglages. Une fois que la programmation initiale est faite, les valeurs sont mémorisées jusqu’au moment où vous les changez. Ainsi l’appareil fonctionne toujours sous les même conditions. ● Le réglages restent en mémoire même si l’appareil est mis en standby.
1.2 Syntonisation manuelle - Poussez UP/DOWN pour sélectionner cet item et poussez OK pour y entrer. - Utilisez les boutons GAUCHE/DROITE pour faire le réglage. 1.3 Liste des émetteurs (Program edit) - Poussez UP/DOWN pour sélectionner cet item et poussez OK pour y entrer. - Poussez le bouton ROUGE pour affacer l’émetteur. - Poussez le bouton VERT pour alle dans le mode pour renommer l’émetteur. Ensuite utilisez les boutons UP/DOWN pour changer la valeur.
2.1 Mode image Options : utilisateur, dynamique, standard, doux. REMARQUE : le contraste, la luminosité, la couleur, la teinte et la netteté peuvent uniquement être réglés quand vous avez choisi « utilisateur ». 2.2 Contraste La valeur peut être réglée entre 0-100. 2.3 Luminosité La valeur peut être réglée entre 0-100. 2.4 Couleurs La valeur peut être réglée entre 0-100. 2.5 Teinte La valeur peut être réglée entre 0-100 REMARQUE : ceci est uniquement disponible en système NTSC. 2.
3.1 Mode son Options : standard, musique, film, sports, utilisateur REMARQUE : les graves et aigües peuvent être réglés quand vous avez chois « utilisateur ». 3.2 Aigües La valeur peut être réglée entre 0-100. 3.3 Graves La valeur peut être réglée entre 0-100. 3.4 Balance Pour régler la balance entre les haut-parleurs gauche et droite entre -50 à 50. 3.5 Volume automatique Pour mettre le volume automatique en/hors fonction. 4. TEMPS 4.
5. OPTIONS 5.1 Langue OSD Pour choisir la langue du OSD. 5.2 Langue télétexte Pour choisir la langue du télétexte. 5.3 Format écran Options : auto, 4 :3, 16 :9, Zoom1, Zzom2, PAL+ REMARQUE : pas disponible quand il n’y a pas de signal. 5.4 Ecran bleu Pour mettre la fonction écran bleu en ou hors fonction. L’écran bleu apparaît en cas d’un signal faible ou pas de signal, quand cette option est en fonction. 5.5 Bloquage boutons Poussez OK pour mettre en/hors fonction. 5.
MODE PC - Mettez en fonction le TV et le PC. - Connectez le PC au TV par un câble VGA. - Poussez le bouton TV/AV pour sélectionner mode PC. - Poussez le bouton MENU pour entrer dans le menu principal et utilisez les boutons de navigation GAUCHE/DROITE pour sélectionner ECRAN. - Utilisez les boutons UP/DOWN pour sélectionner l’option voulue et poussez OK pour enter dans les sous-menu. - Utilisez les boutons GAUCE/DROITE pour effectuer le réglage.
ENTRETIEN ● Vérifiez que l’appareil a été mis en standby et que la prise courant secteur à été retirée avant de nettoyer l’appareil. ● Utilisez un chiffon doux et sec. ● Si la surface est très sale, utilisez un chiffon trempé dans une mélange eau-savon et repassez par après avec un chiffon doux. ● Ne jamais utiliser l’alcohol, essence, thinner, liquides de nettoyage ou autres produits chimiques. Ne pas utiliser des aérosols pour enlever la poussière.
INSTALLATION DU PIED Votre TV est livré avec un pied séparé. Avant d’utiliser le TV montez le pied en suivant les instructions ci-dessous.. Étape 1 Posez la TV à plat, écran tourné vers le bas, sur un tissu doux ou coussin, pour éviter de l'endommager. Étape 2 Alignez le bas de la TV avec l'extrémité du support, jusqu'à ce que la TV soit totalement installée. Étape 3 Serrez les vis fournies à l'aide d'un tournevis.
SPECIFICATIONS Ecran Résolution Dimensions pixels 21.5 pouces LED 1920×1080 Luminance Contraste Format écran Temps de réponse Angle de vue Ecran visible 200 cd/m2 1000:1 16:9 14 ms 178(H)/178(V) Durée de vie FORMAT DE LECTURE MULTIMEDIA USB1 (MODE TV FORMAT DE LECTURE MULTIMEDIA USB2 (MODE DVD) Discs supportés ALIMENTATION CONSOMMATION TEMPERATUR D’OPERATION DIMENSIONS POIDS 0.24825(H)×0.24825(V)mm 476.64(H)×268.11(V)mm 30.
EN CAS DE PROBLEMES Consultez la liste ci-dessous en cas de problèmes : Problème (GENERAL) Pas de puissance Pas d’image ● Pas de son ● Distorsion dans le son Aucune opération peut être commandée par la trélécommande Aucun bouton (ni de l’appareil ni de la télécommande) est effectif Problèmes (TV) Pas d’image ou mauvaise image Pas de son ou son faible Souffle ou autres interférences Problèmes (DVD) Lecture ne démarre pas, même pas après sélection du titre La langue parlée ou la langue des sous-titres ne c
GENERAL TROUBLESHOOTING D’autres langues parlées ou langues pour sous-titre ne peuvent pas être sélectionnées L’angle de vue ne peut pas être changé J’ai oublié le mot de passe Problèmes (Video CD) Pas de reproduction par menu Problèmes (USB) Mon appareil ne reconnait pas ma clé USB ou disque dur externe ● Il n’est pas possible de choisir d’autre langues quand le disque ne contient qu’une seule langue.