Operation Manual

Precautions
1. When the product enters into Bluetooth mode after startup and it will
automatically enter into the standby mode 120 seconds later when it
cannot connect to Bluetooth device.
2. This product will enter into the CONNECTION mode in case of PAIR
success.
3. When the paired equipment number exceeds the maximum capacity,
i.e. 8, the product will automatically clear the first equipment i
n its memory
.
Search Mode
Press “PAIR/
” key for a longer time during startup or PAIR mode to
enter into this mode. The blue lamp will flicker once every second; while i
n
the SEARCH mode, the product will try to connect the equipment
connected last time; and will enter into the CONNECTION mode if the
equipment is found.
This unit will enter into the standby mode 120 seconds after search.
Standby Mode
The blue LED lamp will flicker slowly and the blue lamp will flicker once
every 5 seconds; while in the standby mode, it will accept to connect to al
l
equipment once paired, 8 at most in records.
Connection Mode
The blue LED lamp keeps ON after PAIR; when the earphone icon
does not appear on the mobile phone screen before use, just activate the
Bluetooth connection as below:
(1) Use the mobile phone to select “Salora BTS1200” in the phone
PAIR list for connection;
(2) Shortly press “PAIR/
” key and select “Accept to connect” on the
mobile phone screen.
-6-