Operation Manual

EN
3
STANDBY MODE
Place the unit on a flat stable surface and plug the power cord into the mains
socket.
 The unit is in standby mode
 “0:00” will flash on the display.
SETTING THE CLOCK
1. In standby mode, while the display flashes repeatedly press HOUR / MIN
to set the hours and minutes.
 Press and hold HOUR / MIN to advance the hour and minute until the
correct time is reached.
2. Press SET to confirm.
 The display will stop flashing.
POWER ON/RADIO MODE
Press POWER to switch the unit on and enter the radio mode.
 The radio frequency will briefly appear on the display and then return to
clock time.
RADIO OPERATION
1. Press POWER to turn on the radio.
 The default FM radio frequency is 87.5 MHz.
2. Press BAND once to enter the AM radio mode.
 The default AM radio frequency is 522 KHz.
3. Repeatedly press BAND to select the desired radio band.
4. Adjust the volume by repeatedly pressing VOL+ / VOL-.
5. Repeatedly press TU+ / TU- to tune into the desired station.
 Press and hold TU+ / TU- for auto forward or backward radio station
searching.
NOTE:
 For the best FM reception, extend the FM aerial to its full length.
 For the best AM reception, rotate the unit slowly and horizontally.