Operation Manual

-6-
Press the LEFT/RIGHT to highlight the Yes option and press SET button, the
player begins to scan and will store the channels automatically.
Setting your Radio
On the Radio screen, press SET button on the back of the unit, a menu appears on
the screen, press LEFT or RIGHT button to select the option on the screen, then
press SET button to confirm your selection.
The menu is:
Back: Choose it to return the Radio screen.
Manual Scan/ Pre-stored Channel/ Step: Choose it and use LEFT or RIGHT
button to search channels manually./ Press LEFT or RIGHT button to enter the pre-
stored channel./ Fine- tuning by pressing the LEFT or RIGHT button.
Full Scan: Choose it, the unit start to search and save channels automatically. You
can press MODE button to interrupt the scan.
Save as Alarm Channel: Choose one channel as the alarm ringing.
4.3 Alarm
Press the MODE button on the back of the unit; several icons appear at the bottom
of the screen.
Press LEFT or RIGHT button to highlight the Alarm icon , and press MODE
button to display the Alarm interface.
Two Methods to Set the Alarms
Method 1
1. Press LEFT or RIGHT button to choose the Alarm 1/Alarm 2.
2. Press SET button on the back of the unit, a menu appears on the screen, press
LEFT or RIGHT button to select the option on the screen, then press SET
button to confirm your selection.
The menu is:
Back: Choose it to return the Alarm interface.
Valid: Choose it, the alarm you choose is valid, meanwhile and the color of its icon
on the right top of the screen changes to yellow.
Invalid: Choose it, the alarm you choose is invalid, meanwhile and the color of its
icon on the right top of the screen changes to gray.
Method 2
1. Press ALARM 1/ALARM 2 button on the top of the unit, the setting menu
appears on the screen.
2. Press LEFT or RIGHT button to slide the cursor up and down on the screen,
then make the cursor stop on the option you desire and press SET button, the
option turns to red, then press LEFT or RIGHT button to set it.
3. After your setting, press SET button to confirm it, and press ALARM 1/ALARM 2
to exit the setting menu screen.