Operation Manual

Instructions GuideInstructions Guide
DAB Radio
Press the ‘Standby/ Mode’ button (Ref.1) to switch to DAB Radio.
.
Fully extend the antenna (Ref.15).
To auto scan (if the unit hasn’t automatically done so, or shows
no signal) press the ‘Scan’ button (Ref.3) and then release. This
will start scanning up the frequency band and store all stations
that have a good signal. Please note, if you aren’t in a good DAB
signal area then your signal may be very weak.
The radio will automatically save all the stations with a strong
signal.
.
To listen to all stations that have been stored use the ‘Next’
(Ref.9) and ‘Prev’ (Ref.7) buttons to scroll through the stations.
The radio will display station information when you press the
‘Info/Menu’ button (Ref.6). Press multiple times to view all
information available (see page 10).
automatically tune to the same station (DAB or FM) that was
last selected.