Operation Manual

Hints and Tips
Problem Cause / Solution
No Sound Adjust the volume control, it may not be turned up.
Static Sound Signal reception is too low. Adjust the aerial or move the unit to
a stronger signal location.
Sound is distorted Volume is too high. Adjust the volume control.
Desired station not
found
Weak signal. Use the Manual Tune function.
The display shows “Not
available”
No DAB coverage in your area or poor reception. Adjust the
position of the aerial.
The display is blank This may occur if the broadcaster changes the label of a service
or removes a label. The unit will try to retune or perform a scan.
Mains Supply Mains adapter Input 100-240 V ~ 50/60 Hz
Mains adapter Output DC 5 V 1A
DC battery 4 x 1.5 V (AA) batteries (not included)
Output Power 1 x 1W
Radio Frequency
Range
FM 87.5 – 108 MHz
DAB Band III 174.928 – 239.200 MHz