Operation Manual

19
You can set up the PLAYER to schedule recordings to begin and end at a specific time. Record either on HDD or
DVD. This feature is useful if the specific quality, time, date and channel of a program you want to record are
known in advance.
1. Press the TIMER button to enter the timer
recording schedule setup menu, as shown in the
chart to the right. There are 8 records in this menu.
Each record represents a recording schedule.
2. In the timer recording setup menu, use the
UP/DOWN buttons to select a record to edit, and
press the Enter button to confirm.
3. Select an input source:
Use the UP/DOWN buttons and the ENTER button
for navigation.
In the Item Editor dialog box, use the UP/DOWN
buttons and the Enter button to select a source.
Then you get a list of every saved program and Video
input. Choose one and press Enter.
4. Set up the recording quality:
In the Item Editor dialog box, use the UP/DOWN and
Enter buttons to select the quality value. Highlight
“Quality” and press Enter. A list with all 6 recording
quality settings is display. Choose your desired
setting from: HQ, SP, SP+, EP, LP, and SLP.
Editor
Source
Ch060
Record to
HDD
Quality
SP
Mode
Once
Date
12 / 08 / 06
Start
20 : 15
End
22 : 15
Title
MyTitle 01
5. Select a recording mode: Use the UP/DOWN buttons and the ENTER button for navigation.
Select MODE and a list with all recording modes will open. Choose one and press Enter. You can choose from the
following timer options: Once (once at the given time), Daily (every day at the given time), Weekly (once a week at
the same time), Mon – Fri ( Mon – Fri at the same time), Mon – Sat (Mon – Sat at the same time), Weekends (Sat
- Sun at the same time)
6. Set up the recording date:
A. If you select Weekly, Mon – Fri, Mon –Sat, or Weekends, press the ENTER button to confirm. Under DATE
the selected option is displayed. Now you just have to select a Start time and an End time. A yellow marker
will be displayed which you can move with the Arrow buttons. Use the UP/DOWN buttons to select the
time values and press Enter. Now you can input the time with the Number buttons in HH:MM. Confirm
with ENTER.
B. If you select Once, you will have to enter the date in the DATE field. Use the UP/DOWN buttons to select
DATE and then press Enter. A yellow marker will be displayed which you can move with the Arrow
buttons. Input the date in DD/MM/YY format using the number buttons 0…9. Confirm with ENTER.
Change to Time and press ENTER. Then use the number buttons 0…9 to input the time in HH:MM.
Confirm with ENTER. You cannot input an improper date. If the date is not valid nothing will happen. You
can only edit one line at a time.
Timer Recordin
g
OK Cancel
Timer Recording________________
Source Qualit
y
Date Start End Record