Operation Manual

This DVD recorder offers you various functions to satisfy your demands. You can customize the system and its

operations according to your needs. If this seems to be too complicated, you can always select one of the default

settings which cater for all basic needs.

Operation Interface and General Steps

This chapter will explain the

Operation Interface of the System Setup and general operational

Steps

1. Press SETUP, to change to System Setup Mode. Now the System Setup Menu appears as in the following

Picture.

The symbols and their meanings:

1. Auto Chapter Marker

2. Recording Quality

3. APS

4. Change Channel

5. Program List

6. Timer-Settings

7. Country Selection

2. Use the UP/Down buttons to navigate and Enter to open the setup menu. In the Setup Menu use the

UP/Down buttons to navigate and Enter to access different menu points and change their settings.

3. Press RETURN, to go up to the previous menu. Press SETUP, to leave the System Setup Mode.

Note:

• The above mentioned steps are general and typical operations. Some adjustments may not require some

of the mentioned steps and some may require additional steps.

• Please set-up the system to Eject-Disc-Mode or No-Disc-Mode. Otherwise some settings cannot be

adjusted.

stem Setu

Auto Chapter Marker

Recording Quality

APS

Program List

Timer

Settings

Country Selection

Scan

Edit

Sort

Deutschland