Operation Manual

45
Automated Chapter Marker
1. In the Recording Settings menu, use the Arrow buttons to select “Automatic Chapter Marker”, and press ENTER
to open a menu.
2. Use the Arrow buttons Up/Down to select a proper setting (5min, 10min, 20min, 30min or off), and press
ENTER to confirm.
3. Press RETURN to go back one level in the menu tree and set up other options.
* Use different time options to insert chapter markers at x-minute intervals during recording.
Recording Quality
1. Use the Arrow buttons Up/Down to select “Recording Quality” in the recording settings menu. Then press
ENTER to open the next menu.
2. Use the Arrow buttons Up/Down to select the desired value, and press Enter to change it.
3. Press Return to change to the previous menu to change other settings.
For further information on the difference of the six settings SP, SP+, LP, SLP, EP and HQ, please see appendix.
Automatic Programme Scan - APS
The DVD recorder features built-in television tuner. You can receive the television signal directly with the unit. In
order to do so, you first need to run the “Automated Programme Search” to search and save all available channels.
All found channels remain in the recorders memory, even if electricity fails. Press SETUP to get to the System
Settings Menu, select „APS Off” using the Up/Down Arrow buttons. The following screen appears:
The Symbols and their meanings:
1. Use the Arrow buttons Up/Down to select the APS symbol as shown in the above illustration on the left (as in
channel information).
2. Press OK to get a screen as in the above illustration on the right. Now the search process has started and all
the found channels will be stored in the memory of the DVD recorder. This can take some minutes.
3. When the search is finished the amount of found channels is displayed. Press Setup to leave the settings
menu.
S
y
stem Setu
p
It is necessary to interrupt the current
Timeshift function in order for Auto Scan to
start.
OK Cancel
Confirm Channel Search
2% 63.80 MHz
0 Channels found
Cancel