Operation Manual

47
Note:
In television mode you can press the Audio button to switch between Mono and Stereo output. if the selected
channel is capable of stereo output. If the selected channel is capable of two channel output, by pressing the Audio
button you can switch between Mono, Dual A and Dual B Sound.
Sorting the Channel List
If you want to sort the channels chose the Sort Channel
option (Sort Channel Order) and use the Up/Down
Arrows to enter the Sort Channel Mode and sort as
follows:.
In the left dialogue box, press the Arrow buttons
Up/Down to locate the channel you want to changed.
Use the Right Arrow button to move this channel to the
left dialog box, press the Enter button to confirm.
Use the Arrow buttons Up/Down to move this channel
to the desired location
.
Press the Enter button to insert the channel. The
original channel at this location will move to the next
location.
After completing the sorting process, press the Return
button to exit the menu.
Note:
Make sure to connect the aerial properly before you start scanning for channels. For the correct connection, please
see “Basic Information: System Connection for Recording External Signals” for reference.
Country Selection
Use the Arrow buttons on your remote control to select one of 19 difference countries This is important when
searching for a special channel list of your country.
.
Setup Menu – Video
TV – Type
The product supports two different television systems
that are incompatible with each other. NTSC is a
television system that is used in North America while
PAL is a television system that is typically used in the
rest of the world, especially in Europe and Asia.
1. In the General Settings menu, select TV Type and
press Enter to confirm.
2. Select PAL or NTSC.
3. Press the Enter button to confirm. This setting must
be in accordance with the TV system. Otherwise the TV
system might not work properly.
OK
Cancel
S
y
stem Setu
p
PAL
T
V
T
yp
e
A
s
p
ect Ratio
Video Output Format
V
ideo Out
p
ut
4:3 LB
Interlaced
Com
p
osite