Operation Manual

TV Display

1. In the Play Settings Menu select TV aspect ratio as seen in the menu in the next figure.

2. Use the Arrow buttons Up/Down to select a value you want to change, and press the Enter button to confirm.

The values to be selected in this setting are explained as follows. 16:9WS is suitable for a wide screen television.

Pan Scan is suitable for a television with ordinary screen size. When a wide screen picture is displayed, the left and

right sides will be cut and the picture will occupy the entire screen. 4:3 is used for ordinary televisions. When a wide

screen picture is displayed, black bars will appear at the top and bottom of the television screen. The default value

is Letter Box.

3. Press the Return button to return to the previous menu.

Note:

 The Video Output Format depends on the recorded picture settings. Some pictures might not be

displayed under the Video Output Format you select.

 For discs recorded with 4:3, no matter how the Video Output Format is set, the displayed Video Output

Format is always 4:3.

 The selection of the Video Output Format should match your television.

Video Output Format

1. Use the Arrow buttons Up/Down to select “Video Output Format” in System Settings and confirm with Enter.

2. Choose Progressive or Interlace as Video Output Format and confirm with Enter.

 This function can be saved by pressing the PS/IS-button.

stem Setu