Operation Manual

49
Setup Menu - Audio
1. Enter the System Setup Menu.
2. Use the Arrow buttons Up/Down to select “Audio”.
Press the Enter button to enter the Playback Settings
Menu. The following picture shows the Playback
Settings main menu.
Analogue Audio Output
The unit can set the analogue audio output to 2-CH or 5.1-CH (5.1 Surround Sound).
The 2 channel output goes to the L and R channels.
1. Enter the playback settings menu, use the Arrow buttons Up/Down to select SPDIF Output, and press the
Enter button.
2. Use the Arrow buttons Up/Down to select 2-CH or 5.1-CH Output, and press the Enter button
SPDIF Output
This unit has a digital audio output. You can enjoy sound of better quality through a digital audio output.
1. Enter the play settings menu, use the Arrow buttons Up/Down to select SPDIF Output, and press the Enter
button to pop up a new menu.
2. Use the Arrow buttons to select the desired value (RAW, LPCM) and press the Enter button to confirm.
3. Press RETURN, to go to the previous menu.
S
y
stem Setu
p
Analog Audio
SPDIF
-
Output
LPCM
-
O
utput
Dynamic
ON
RAW
LPCM 96K
Off