Operation Manual

LPCM Output

The unit uses the LPCM96K and LPCM48K Audio Sampling.

Dynamic Range

The unit can use the following Settings: “full > ¾ > ½ > ½ > off”. Here you can change the compression rate of the

Audio Output. Try to feel the difference of the different settings.

Setup Menu - Language

1. To satisfy the needs of consumers in different

regions, the unit provides various system languages.

2. Go to Setup menu – Language.

In the System Setup menu, use the Arrow buttons

Up/Down to move the cursor, select the Language icon,

and press the ENTER button to enter the Language

Settings menu, which contains four items as shown in

the chart.

System Language

1. In the System Language menu, use the Arrow buttons Up/Down to move the cursor, select “System

Language”, and press the Enter to enter the menu.

2. Use the Arrow buttons Up/Down to select the desired Language, and press Enter to confirm. The System

Language changes immediately to the chosen Language.

Audio Language

1. In the System Language menu, use the Arrow buttons Up/Down to move the cursor, select “Audio Language”,

and press the Enter to enter the menu.

2. Use the Arrow buttons Up/Down to select the desired Language, and press the Enter to confirm.

* If you play a DVD disc supporting the selected language, the system will load the DVD with these language

settings.

* If the disc does not support the selected language, the system will use the default language provided by the disc.

stem Setu

OSD Lan

udio- Lan

Subtitle- Lan

Menu Lan

lish